REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
1 parallel position and turn it over.
2 Unscrew the two screws as shown. | OPEN | |
|
| |
Remove the bottom plate by pulling
3 the tabs as illustrated.
Pull here
Bottom Plate
REATTACHING THE BOTTOM PLATE
Insert the projection on the bottom plate 1 into the groove on the nozzle head
and set the bottom plate in place.
Bottom Plate
Projection
Groove
3 Set the two screws to its original place.
CLOSE
2 Push the bottom plate as shown.
Press
Press
Turn the vacuum over and place in the
4 upright position.
Nozzle Head
Height Adjustment Lever
14
