OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Charging the Battery
1.Charge your battery pack for a minimum of 10 hrs before you use your hand held trimmer for the first time.
NOTE: Remove the battery from the hand held trimmer before making adjustments or storing the unit. This will help prevent accidental starting of the unit which could result in serious injury.
The battery requires a minimum of 10 hours charging BEFORE first use of the hand held trimmer.
To remove the battery:
2.Press both battery release buttons on battery in compartment and pull out from hand held trimmer. (Fig. 1)
Fig. 1
3.Connect the charging adapter to the charger base and into a main power supply outlet. (Fig. 2)
4. Ensure that the charger base is on
a flat,
5. The battery requires 10 hours to charge fully from flat. To keep the battery in optimum condition it is best to completely discharge the battery pack before recharging.
6.To replace the battery; align the battery correctly in the compartment, and push in until you hear a click. (Fig. 4)
Follow these steps when battery removal is required.
WARNING: You must never use ordinary batteries for replacement as these may leak and cause damage.
Use only battery pack XBAT194 provided by FANTOM for replacement.
CAUTION: Any battery operated appliance should not
be stored in or exposed to areas of high heat or humidity. Do not store your hand held trimmer close to stoves, radiators, furnaces or in a bathroom or bathing area.
WARNING: ONLY use provided charger
recharging your
Attaching the Protective Blade Guard
NOTE: Protective blade guard is only to be removed for cleaning.
1.Remove battery before attaching the protective blade guard to the hand held trimmer.
2.Hold the unit facing up and slide the protective blade guard in making sure that it locks in place. (Fig. 5)
3.To remove the protective blade guard for cleaning, remove the battery pack.
4.With the unit facing up, grasp the unit firmly with one hand and the protective blade guard with other.
5.Firmly tilt protective blade cover downwards until you hear a snap. (Fig 5)
6.Slide protective blade guard off unit.
Protective Blade
Guard
Fig. 5
Replace Protective Blade Guard
1.Align opening of protective guard cover with unit and gently slide back into position to lock the protective blade guard in place.
Using Your Hand Held Trimmer
WARNING: If any parts are missing, damaged or broken,
DO NOT operate the hand held trimmer until they have been replaced. Failure to do so could result in possible serious injury.
WARNING: To prevent serious personal injury,
always use the front hand grip and keep other hand free from blades during operation.
WARNING: To prevent serious personal injury, keep
hands away from the blades. DO NOT attempt to remove cut material or hold material to be cut when blades are moving. Make sure that the battery is removed from the unit when clearing jammed material from blades. DO NOT grasp the blades when picking up or holding the unit.
WARNING: Clear the area to be cut before starting.
Remove all objects such as cords, small rocks, lights, wire or string which may become entangled in the cutting blade.
DANGER: If the blade becomes jammed on any
electrical cord or line, DO NOT
TOUCH THE BLADE! IT CAN BECOME ELECTRICALLY LIVE AND VERY DANGEROUS. Continue to hold your trimmer by the insulated handle and immediately disconnect the damaged electrical cord or line from the power source. Failure to heed this will result in serious personal injury and possibly death.
WARNING: Do not remove protective blade cover except for
cleaning purposes. This unit is meant to be used with protective guard cover in place at all times during use.
The hand held trimmer can be used for many jobs in the garden, such as, edging lawns, trimming long grass, topping weeds and thistles and non- wooden plants.
For your protection there is trigger safety interlock above the power switch. The blades WILL NOT operate until the trigger safety interlock has been engaged. Battery will last approximately 35 minutes under continuous use.
1.Press and hold the trigger safety interlock located just before the trigger on the handle. (Fig. 6)
| Trigger Safety |
Fig. 6 | Interlock |
|
2. Squeeze the On/Off trigger. (Fig. 7)
On/Off Trigger
Fig. 7
3.To stop the unit, release the On/Off trigger.
CAUTION: The blades continue to spin after the On/Off trigger is
released. Wait for blades to stop spinning before releasing your grip on the handle.
Fig. 4
5
6
