Fantom Vacuum PT302H owner manual Accessories Carton Contents

Models: PT302H

1 18
Download 18 pages 6.29 Kb
Page 6
Image 6

ACCESSORIES

 

CARTON CONTENTS

AVAILABLE ACCESSORIES

!WARNING

Use only accessories recommended for this rotary tool. Follow instructions that accompany accessories. Use of improper accessories may cause injury to the operator or damage to the rotary tool.

!WARNING

Use only accessories designed for this rotary tool to avoid severe injury or tool damage.

Do not use any accessory unless you have completely read the instructions or Owner’s Manual for that accessory.

LATERAL STYLE DRYWALL CUTTING BIT

This cutting bit has a fine spiral for removing high volumes of material when cutting and leaving a smooth edge.

Use this cutter for cutting drywall.

GENERAL PURPOSE CUTTING BIT

This cutting bit has a coarse spiral for removing material when being used for general cutting.

Use this general purpose cutter for cutting materials such as wood, plastic and fiberglass.

UNPACKING AND CHECKING CARTON CONTENTS

!WARNING

If any part is missing or damaged, do not plug the Rotary Tool into the power source until the missing or damaged part is replaced and assembly is complete.

Carefully unpack the Rotary Tool and all its parts. Compare against the “Rotary Tool Components” chart. NOTE: See Page 7 for illustration of parts and chart.

!WARNING

To avoid fire or toxic reaction, never use gasoline, naphtha, acetone, lacquer thinner or similar highly volatile solvents to clean the Rotary Tool.

6

Page 6
Image 6
Fantom Vacuum PT302H owner manual Accessories Carton Contents