Farallon Communications USB 10/100 manual Chapter

12 CHAPTER 3

LED Blinking: The indicator blinks green when data is received on the 100Mbps network and blinks yellow when data is received on the 100Mbps network.

LED Off: If the LED is off, and you have a network cable connected to the adapter, it may indicate one of the following:

■The network cable is not properly connected or is faulty.

■No 10Base-T or 100Base-TX device is connected at the other end of the network cable.

■The network cable exceeds 100 meters.

■The device is not receiving power from a USB port or there is no USB support on your system.

■You are using a straight-through 10Base-T or 100Base-TX cable to connect directly to another work- station.

■You are using a cross-over cable to connect to a hub.