4
Caution
Never insert hand, fingers or any foreign objects into the feed opening.
Serious injury may result.
Keep all loose articles of clothing, ties, jewelry, long hair or other loose objects away from feed opening.
Injury may result.
Always turn off and unplug the machine before moving, servicing, cleaning or conducting any activity other than normal operation.
Serious injury may result.
Operation
Read operating instructions before putting shredder into operation.
Insert plug into power outlet.
Prepare paper to be shredded, making sure not to exceed the recommended sheet capacity. Paper clips will not harm the cutting system, but the added thickness may decrease sheet capacity (see specifications for recommended sheet capacities).
Switching shredder ON/FORWARD.
Press rocker switch to position (I) (the switch will lock into place.) 
The cutting system is now running 
in the forward mode. Insert the 
paper into throat opening and the cutting system will pull the paper in.
Switching shredder OFF.
Lightly press rocker switch towards (R) The switch will reset to the OFF position (0) and the cutting system will stop.
Switching shredder to REVERSE.
Press rocker switch to position (R) and hold. The cutting system is now running in the reverse direction. Release the switch and it will automatically reset to (0) 0FF.
If a Jam Occurs
The cutting system may jam if the recommended capacity is exceeded (see specifications). When this occurs, depress the switch to the REVERSE position
(R). This will back out the jammed material. The operator should tear out and remove excess jammed paper, if necessary, and then commence shredding in smaller quantities so as not to further jam the machine.
