Fellowes 125 English, Capabilities, IMPORTANT SAFETY INSTRUCTIONS - Please Read Before Using

ENGLISH

Opening lid to clean laminating mechanism

HeatGuard Technology™ double-walled insulation keeps heat inside

Discrete carry handles at side

Active Cooling System

	100	125
80

175

Support Shelf on entry to guide laminate path

Temperature controlled release trigger for lid

					LED Interface for
					user guidance
			LED Panel
LED Interface Key		cold	3	4	5	Enter	Up	Right
			3	4	5
		7
Stand By	Open	7	jam wait		rev	Down	Reverse

Left

CAPABILITIES

Pouch Thickness	3-7 mil
Estimated Heat-Up Time	4 Minutes
Approximate Cool-Down Time	60 Minutes
Lamination Speed	18”/Minute
Maximum Width	12.5” mm
Voltage	120V
Frequency	60 Hz

Laminating capacity – 3-7 mil hot laminating pouches

Up to 12.5”

1000 Watt

Dimensions: 21 7/8” x 9 5/8” x 4 3/4”

Max document thickness 1/32”

IMPORTANT SAFETY INSTRUCTIONS — Please Read Before Using!

•The socket-outlet must be installed near the equipment and be easily accessible.

•To prevent electrical shock, do NOT use laminator close to water and do NOT spill water on laminator, electric cord, or wall socket.

•Do not leave electric cord in contact with a warm surface.

•Do not leave electric cord hanging from a cupboard or shelf.

•Do not use laminator if electric cord is damaged.

•Do not laminate metal objects.

•Only use pouches specifically designed for the lamination setting you intend to use.

•Always supervise children during laminator operation.

•Keep pets away from laminator while in use.

•Switch off and unplug laminator when not in use.

•Only open the laminator as explained under “Maintenance”. Do not open or attempt to repair in any other way, as this could result in electric shock and will void your warranty. Contact Customer Service if you have questions. Please note the warranty does not apply in cases of abuse, mishandling or unauthorized repair.

•Please be careful of sharp edges and corners and residual heat when opening the laminator.

IMPORTANT SAFETY INFORMATION

This laminator is equipped with an Auto shut-off function. It will turn the laminator into	During lamination, the direction of the pouch can be reversed, if you are unsure about
stand-by mode, if it has not been used for over 60 minutes. To switch the laminator	the progress of the lamination. To do so, press down the reverse key. This will eject
back on, simply press the stand-by button at the left of the front operating panel.	the pouch back at the front entry.

2