| 420 |
| 420 CC |
Paper shredder | 420 HS |
8. Checklist for Inoperative Machine
If the equipment does not work properly, please check the following points first:
–Is the plug inserted?
–Is the switch turned on?
–Is the cabinet door closed?
–Is waste receptacle full? Empty waste bag.
–Is there a paper jam in the shredder?
–Is the motor overheated?
Switch machine off and allow motor to cool down for approximately
If none of the above applies and the equipment stil does not run, please contact our customer service department.
Motor Overheating
Red LED lights
–Paper shredder switches off automati- cally.
• Press rocker switch to center position
|
|
|
|
| 2 | (2). |
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
| • Allow shredder to cool down for |
|
|
|
|
|
| approximately |
|
|
|
| 1 | • Return switch to "on" position (1) | |
|
|
|
| and continue shredding. | ||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
Cabinet door ajar / bag full
Red LED lights
–Paper shredder switches off automati- cally.
9. Malfunctions
•Press rocker switch to center position
Paper jam
2
3
Red LED lights
•Press rocker switch to center position
(2) to stop the cutting system
•Press and hold down rocker switch in pos. 3 to reverse the cutting system and back out jammed material (paper is pushed out)
2 (2).
• | Make sure cabinet door is properly |
| closed and/or empty waste bag. |
1 • | Return switch to "on" position (1) and |
| continue shredding. |
10. Maintenance
(Cross cut unit only)
Caution!
1 Do not attempt to force the jammed
– When shredding capacity drops or the |
3
material through the machine by alternating the cutting system between forward and reverse
noise increases |
• Spray special cutting block oil onto |
cutting system |
• Remove excess paper
1 • Return switch to pos. 1 and continue shredding in smaller quantities so as not to jam the machine further
Note:
The 420 HS will not run forward again unless the jammed material has been completely removed from the throat
1 | • | Run cutting system forward and |
3 |
| backward several times without feeding |
| paper | |
|
| |
| • | Continue shredding |
Edition 08/99 | 1.209.999.100 | 7 |
USA