Fellowes Cosmic2 95, Cosmic2 125 manual Laminator Controls, Capabilities, Features & Tips

ENGLISH		E
LAMINATOR CONTROLS
A	On / off switch		F	Pouch / document entry slot
B	Standby button & LED		G	Entry support shelf
C	Pouch selection buttons ( , 3 Mil, 4 Mil)		H	Pouch / document exit
D	Release lever (	)	I	Cooling system vents

ECarry handle

CAPABILITIES

Performance		Technical Data
Entry width	125 = 12.5” / 318mm	Voltage / Frequency / Current(Amps)	125 = 110-120V AC, 60Hz, 4.2A
	95 = 9.5” / 240mm		95 = 110-120V AC, 60Hz, 3.5A
Pouch thickness (min)	3 Mil (per side)	Wattage	125 = 480 Watts
Pouch thickness (max)	4 Mil (per side)		95 = 430 Watts
		Dimensions (HxWxD)	125 = 4.3” x 22.4” x 6.1”
Warm up time (estimate)	5-6 minutes
			95 = 4.3” x 17.7” x 5.7”
Cool down time	60-90 minutes
		Net weight	125 = 4.4lb
Lamination speed (+/- 5%)	approx. 12”/min (fixed speed)
			95 = 3.7lb
Number of rollers	2	Max document thickness
Ready indication	Light & beep	(laminating capacity)	.040” / 1 mm
Release lever	Yes
Clear Path / Anti-jam engine	Yes
Cold lamination	Yes

IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE

-The machine is for indoor use only. Plug the machine into an easily accessible socket.

-To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.

DO ensure the machine is on a stable surface.

DO test laminate scrap sheets and set the machine before final laminations. DO remove staples and other metal articles prior to laminating.

DO keep the machine away from heat and water sources. DO turn off the machine after each use.

DO unplug the machine when not in use for an extended period. DO use pouches designed for use at the appropriate settings. DO keep away from pets, while in use.

DO ensure self-adhesive pouches are only used with the cold setting.

DO NOT leave the power cord in contact with hot surfaces. DO NOT leave power cord hanging from cupboards or shelves. DO NOT use appliance if the power cord is damaged.

DO NOT attempt to open or otherwise repair the machine. DO NOT exceed the machines quoted performance.

DO NOT allow children to use this machine without adult supervision. DO NOT laminate sharp or metal objects (eg: staples, paper clips).

DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on hot settings.

DO NOT laminate with self-adhesive pouches on hot settings. DO NOT laminate an empty pouch.

FEATURES & TIPS

‘Safe Start’ function

When switched on, the machine has a default ‘Safe Start’ function which is set to the cold pouch setting. You may select other hot temperature settings if required. The machine will warm-up and alert the user when it is ready.

‘Release’ function

To remove or re-align a pouch during lamination, activate the release lever located at the rear of the machine. The pouch can only be removed from the entry slot when the lever is activated.

•For best results, use Fellowes ® brand pouches:

3 Mil and 4 Mil.

•For self-adhesive (cold pouches) only use the cold setting.

•This machine does not need a carrier to laminate. It is a carrier-free mechanism.

•Always put the item to be laminated into the appropriate sized pouch.

•Always test laminate with a similar size and thickness before final process.

•Prepare pouch and item for lamination. Place item within pouch centered and touching the leading sealed edge. Ensure the pouch is not too large for the item.

•If required, trim excess material from around the item after lamination and cooling.

•When working with different pouch thickness’ (temperature settings) it is recommended to first start with the thinnest pouches.

4