Fellowes DM10C manual Troubleshooting, Limited Warranty, Symptom, Remedy, under Maintenance

Models: DM10C

1 4
Download 4 pages 32.51 Kb
Page 4
Image 4
Maintenance

Maintenance

Regular emptying of the basket is important to ensure the smooth operation of the cutting cylinders. If you can see paper in the basket window (7), turn off the shredder, pull out the basket and empty basket contents.

Regular oiling of the shredder is also necessary to ensure proper performance. If you are running the shredder at or near capacity, we recommend oiling it monthly. Using Fellowes Powershred Lubricant #35250 or other non-aerosol vegetable-based oil in a long-nozzle container:

• Apply oil over full width of paper entry (1) with shredder in off [O] position.

• Press control switch to automatic [I] position which will cause shredder to run for about 2 seconds.

Press and hold control switch in reverse [R] position for 3-5 seconds.

Repeat above automatic [I] and reverse [R] sequence three times.

REMINDER: Do not use flammable synthetic oil, petroleum-based products or aerosol lubricants of any kind in or near the shredder at any time.

Troubleshooting

If you have a problem with your shredder, check the symptoms and remedies below. If you cannot solve the problem this way, contact Fellowes Customer Service. Do not open shredder head to attempt repair: It could expose you to serious electric shock and will void your warranty.

Symptom

Remedy

Shredder does not start or stops while

Make sure shredder is plugged in and

shredding.

 

switch is in automatic [I] position.

 

If paper appears to be jammed. Follow

 

 

instructions under Operation.

 

Check basket position; basket must be

 

 

pushed all the way in the cabinet.

 

 

Follow instructions under Set-Up.

 

 

 

Overheat light (10) turns on and shredder

Wait 40 minutes for shredder to cool

will not operate.

 

down before trying again.

 

 

 

Red display light (5) turns on and shredder

If paper appears to be jammed. Follow

will not operate.

 

instructions under Operation.

 

Check basket position; basket must

 

 

be pushed all the way in the cabinet.

 

 

Follow instructions under Set-Up.

 

 

 

Shredder squeaks, grinds or runs below

Oil cutting cylinders. Follow instructions

capacity.

 

under Maintenance.

 

 

 

Shredder continues to run for a few sec-

No action required. This is a self-clean-

onds after shredding has been completed.

 

ing function.

Limited Warranty

Fellowes, Inc. warrants the cutting cylinders of the machine to be free from defects in material and workmanship for 5 years from the date of purchase by the original con- sumer. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part.

This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WAR- RANTY PERIOD SET FORTH ABOVE. IN NO EVENT SHALL FELLOWES BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ATTRIBUTABLE TO THIS PRODUCT. This warranty gives you specific legal rights. You may have other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law.

To obtain service under this warranty, please contact us (see back cover) or your dealer.

5

6

Page 4
Image 4
Fellowes DM10C manual Troubleshooting, Limited Warranty, Symptom, Remedy, under Maintenance