Fellowes DM17Ci manual Key, Capabilities, Advanced Product Features

A. B. C. D.

17

G.

D
M
17	Ci

AUTO

ENGLISHENGLISH

Model DM17Ci

KEY

A. SafeSense® Technology	F. Casters	K. Bin open (red)	P. Auto correcting button (blue)
B. Paper entry	G. Disconnect power switch	L. Bin full (red)	Q. Reverse
C. See safety instructions	H. SafeSense® override switch	M. Remove paper (red)	R. On/off (blue)
D. CD/Card flap	I. Power controls	N. SafeSense® indicator (yellow)	S. Forward
E. Pullout bin	J. Overheat (red)	O. Sheet capacity indicator

E.

H.

J.

K.

L. M.

CAPABILITIES

Will shred: Paper, credit cards, CD/DVD’s, staples and small paper clips

Will not shred: Adhesive labels, continous form paper, transparencies, newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted above

Paper shred size:
Cross-Cut	5/32” x 1-1/2” (3.9 x 38mm)

ADVANCED PRODUCT FEATURES

Maximum:
Sheets per pass	17*
CDs/Cards per pass	1*
Paper entry width	9” (230mm)

*8.5”x11”, 20lb., (75g) paper at 120V, 60 Hz, 5.0 Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Recommended daily usage rates: 50–100 shredding passes per day,

50 credit cards; 10 CDs. 17 sheets per pass.

Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging between 50 – 80 degrees Fahrenheit (10 – 26.6 degrees Celsius) and 40 – 80% relative humidity.

F.

N.

O.

Jam Proof System

Eliminates frustrating jams by preventing overloads and powering through misfed paper.

TECHNICAL EXPLANATION

Sheet capacity indicator tells you when you have too many or too few sheets to maximize productivity

Shredder will not operate when too many sheets are fed into paper entry (red light). Reduce sheet quantity and refeed

If misfed, shredder will automatically adjust to power through or reverse

out paper

® Technology

Stops shredder immediately when hands are too close to the paper entry.

TECHNICAL EXPLANATION

Shredder will stop automatically and indicator will light up when hands are too close to the paper entry

Shredder will resume normal operation when hands are no longer near the paper entry

Flashing indicator warns when SafeSense® technology has been shut off

SilentShred™ Technology

SilentShred™ noise quality shreds without noisy disruptions

TECHNICAL EXPLANATION

SilentShred™ motor features whisper-quiet, efficient shredding performance without the noisy disruptions

P.

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

DM17Ci

I.

AUTO

Q. R. S.

•Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use.

•Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder openings. If object enters top opening, switch to Reverse ( ) to back out object.

•Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder.

•Do not use if damaged or defective. Do not disassemble shredder. Do not place near or over heat source or water.

•This shredder has a Disconnect Power Switch (G) that must be in the ON (I) position to operate shredder. In case of emergency, move switch to OFF (O) position. This action will stop shredder immediately.

•Avoid touching exposed cutting blades under shredder head.

•Rotate CD flap entry for shredding CDs/cards. Keep finger away from CD hole.

•Do not put foreign objects in paper entry.

•The grounded socket-outlet shall be installed near the equipment and shall be easily accessible.

2