Fellowes M-8C Capabilities, IMPORTANT SAFETY INSTRUCTIONS - Read Before Using, English, E F G

Models: M-8C

1 4
Download 4 pages 34.2 Kb
Page 2
Image 2
ENGLISH

A.

B.

C.

D.

ENGLISH

Model M-8C

E

F.

G.

KEY

A. Shredder head

E Disconnect power switch

G. Control switch and LEDs

B. Safety Lock

1.

OFF

1.

Auto-On (green)

 

I 2.

ON

2.

OFF

 

F. See safety instructions

3.

Reverse

 

 

 

4.

Overheat (red)

C. Window

 

 

 

 

D. Bin

 

 

 

 

CAPABILITIES

Will shred: Paper, credit cards, staples and paper clips

Will not shred: Continuous forms, CD/DVDs, adhesive labels, transparencies, newspaper, cardboard, laminates, X-rays or plastic other than noted above

Paper shred size:

 

Cross-Cut

4mm x 50mm

Maximum:

 

Sheets per pass

8*

Cards per pass

1*

Paper entry width

230mm

*A4 (70g), paper at 220-240V, 50/60 Hz, 1.6Amps; heavier paper, humidity or other than rated voltage may reduce capacity. Maximum recommended daily usage rates: 60 sheets;

5 cards. Model M-8C 8 sheets per pass.

EE Disconnect power switchB. Safety LockF. See safety instructionsReverseC. WindowD. BinCAPABILITIES IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

Operation, maintenance, and service requirements are covered in the instruction manual. Read the entire instruction manual before operating shredders.

Keep away from children and pets. Keep hands away from paper entry. Always set to off or unplug when not in use.

Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from

shredder openings. If object enters top opening, switch to Reverse ( Paper shred size: ) to back out object.

Never use aerosol products, petroleum based lubricants or other flammable products on or near shredder. Do not use canned air on shredder.

Do not use if damaged or defective. Do not disassemble shredder.

Do not place near or over heat source or water.

This shredder has a Disconnect Power Switch (E) that must be in the ON ( ) position to operate shredder. In case of emergency, move switch to OFF (O) position. This action will stop shredder immediately.

Avoid touching exposed cutting blades under shredder head.

Shredder must be plugged into a properly grounded wall outlet or socket of the voltage and amperage designated on the label. The grounded outlet or socket must be installed near the equipment and easily accessible. Energy converters, transformers, or extension cords should not be used with this product.

FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.

For indoor use only.

Unplug shredder before cleaning or servicing.

Page 2
Image 2
Fellowes Capabilities, IMPORTANT SAFETY INSTRUCTIONS - Read Before Using, English, Model M-8C, E F G, B. Safety Lock