FEATURES & TIPS
‘Release’ function
To remove or
•For best results, use Fellowes ® brand pouches: 3 mil.
•This machine does not need a carrier to laminate. It is a
•Always put the item to be laminated into the ap- propriate sized pouch.
SETTING UP THE LAMINATOR
1. Ensure the machine is on a stable surface.
2. Check there is enough clear space (min 20”) behind the machine to allow items to pass through freely.
•Always test laminate with a similar size and thick- ness before final process.
•Prepare pouch and item for lamination. Place item within pouch centered and touching the leading sealed edge. Ensure the pouch is not too large for the item.
•If required, trim excess material from around the item after lamination and cooling.
3.Plug the machine into an easily accessible main socket.
HOW TO LAMINATE
4. Switch the power on (located at the side of the machine).
5. The red ‘Power on’ lamp will light up. The machine is now heating up.
6. When the machine is ready, the green ‘Ready’ lamp will remain on.
7. Place the document into the open pouch. Ensure the document is centered against the sealed edge. Use the appropriate pouch size for the document.
8. Ensure the pouch enters the machine sealed edge first. Keep the pouch straight and central within the slot, not on an angle. Use the entry markings as a guide.
9. Upon exit, the laminated pouch may be hot and soft. To prevent jamming remove the pouch immediately. Place pouch on to a flat surface to cool. Take care when handling a hot pouch.
10. To release a pouch during lamination, activate the release lever located on the back of the machine. Gently pull pouch out of machine.
NEED HELP?
Let our experts help you with a solution. Customer Service... www.fellowes.com
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
Consider registering your machine at www.fellowes.com/register to receive updates and additional information.
5
407534C
4/23/13 1:12 PM 
