Fellowes T440C manual Troubleshooting, Symptom, Remedy, under Maintenance

Maintenance

Regular emptying of the basket is important to ensure the smooth operation of the cutting cylinders. If paper is within 2 inches of shredder head, turn off and unplug the shredder, remove the shredder head and empty the basket.

Regular oiling of the shredder is also necessary to ensure proper performance. If you are running the shredder at or near capacity, we recommend oiling it monthly. Using Fellowes Powershred Lubricant #35250 or other non-aerosol vegetable-based oil in a long-nozzle container:

•Apply oil over full width of paper entry (E) with shredder in off [O] position.

•Press control switch to automatic [I] position which will cause shredder to run for about 2 seconds.

•Press and hold control switch in reverse [R] position for 3–5 seconds.

•Repeat above automatic [I] and reverse [R] sequence three times.

REMINDER: Do not use flammable synthetic oil, petroleum-based products or aerosol lubricants of any kind in or near the shredder at any time.

Troubleshooting

If you have a problem with your shredder, check the symptoms and remedies below. If you cannot solve the problem this way, contact Fellowes Customer Service. Do not open shredder head to attempt repair: It could expose you to serious electric shock and will void your warranty.

Symptom	Remedy
Shredder does not start or stops	• Make sure shredder is plugged in and
while shredding	switch is in automatic (I) position
	• If paper appears to be jammed, follow
	instructions under Operation
	• Check shredder head position; follow
	instructions under Set-Upto correct
	• Wait 4 minutes for shredder to cool
	down before trying again
Shredder runs below capacity	• Check to see if basket is full, follow
	instructions under Maintenance.
	• Oil cutting cylinders. Follow instructions
	under Maintenance.

Shredder continues to run for 1 or 2 seconds after shredding has been completed

•No action required. This is a self- cleaning function.