Fellowes W11C Operation, Troubleshooting, Capabilities, Warranty, Maintenance, Paper shred size

Models: W11C

1 2
Download 2 pages 42.88 Kb
Page 2
Image 2
OPERATION

GLISH

Model W11C

OPERATION

This shredder has a Control/Disconnect Power Switch (D) that must be in the ON (I) position to operate shredder. In case of an emergency move switch to OFF (O) position. This action will stop shredder immediately. Insert waste bag (Fellowes #36052) for easy disposal.

Handle

Sheets per pass

 

Paper/credit card entry

Shredder head

 

See safety instructions below

Safety lock

 

 

To set lock, push

 

down and slide

Bin

Control switch

 

Auto-On (I)

 

Off (O)

 

Reverse (R)

Continuous operation:

5 minutes maximum

NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 5 minutes will trigger 20-minute cool down period.

Set to Off (O) and plug in

PAPER

Set to Auto-On (I)

Feed into paper entry

 

and release

 

 

CARD

Set to Auto-On (I)

Hold card

Feed into center of entry

 

 

at edge

and release

 

 

 

 

 

Set to Off (O) and unplug

Easy emptying

Safety Lock prevents accidental operation. TROUBLESHOOTINGCAPABILITIES To set, wait for shredding to stop, push black button down and slide towards front of shredder. Paper shred size: To unlock push black button down and slide toward back of shredder. For greater safety, always unplug shredder after use.

TROUBLESHOOTING

CAPABILITIES

Will shred: Paper, credit cards and staples

Will not shred: Continuous forms, adhesive labels, transparencies, newspaper, cardboard, paper clips, laminates or plastic other than noted above

Paper shred size:

 

Cross-Cut

5/32” x 1 3/8” (3.9 x 35mm)

Maximum:

 

Sheets per pass

11*

Cards per pass

1

Paper width

9”/229mm

Continuous operation

5 minutes

*20lb., 8.5”x11” paper at 120v, 60 Hz, 4.5Amps; heavier paper,

humidity or other than rated voltage may reduce capacity. Recommended

Paper jam: Set to Off (O), remove shredder head and empty bin. Replace shredder head, and follow any or

Shredder doesn’t start:

all of the below procedures.

Make sure head is on basket correctly

 

 

Wait 20 minutes for motor to cool down

 

Remove and empty basket

 

Make sure safety lock is in unlock position

Set to Reverse

Alternate slowly back and forth

Set to Off (O)

Gently pull uncut paper

Set to

(R) for 2-3

 

and unplug

from paper entry. Plug in.

Reverse (R)

seconds

 

 

 

 

daily usage rates: 10-20 paper passes; 10 cards.

MAINTENANCE

Run regularly in reverse for one minute

Maximum: Follow oiling procedure below and repeat twice.

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

Lubricate when bin is full, or immediately, if:

Capacity decreases

Motor sounds different, or Shredder stops running

Set to Off (O)

*Apply oil

Set to Auto-On (I)

Shred one sheet

Set to Reverse (R)

 

across entry

 

 

for 2-3 seconds

• Keep away from children and pets. Keep hands away from paper entry. Always unplug or set safety lock when not in use.

• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from shredder openings. If object enters

• Never use aerosol, petroleum based or other flammable

products on or near shredder. Do not use canned air on shredder.

• Do not use if damaged or defective. Do not open shredder head. Do not place near or over heat or water source.

Shredder doesn’t start:MAINTENANCEIMPORTANT SAFETY INSTRUCTIONS — Read Before Using! *Only use a non-aerosol vegetable oil in long nozzle containerWARRANTYManual backgroundManual background *Only use a non-aerosol vegetable oil in long nozzle container

WARRANTY

top opening, switch to Reverse (R) to back out object.

• Avoid touching exposed blades under Cross-Cut shredder head.

2

• 11 sheets per pass to avoid jams.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

LIMITED WARRANTY Fellowes, Inc. (“Fellowes”) warrants the cutting blades of the machine to be free from defects in material and workmanship for 3 years from the date of purchase by the original consumer. Fellowes warrants all other parts of the machine to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part.

This warranty does not apply in cases of abuse, mishandling, or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental damages attributable to this product.

This warranty gives you specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide, except where different limitations, restrictions, or conditions may be required by local law.

For more details or to obtain service under this warranty, please contact us or your dealer.

Page 2
Image 2
Fellowes W11C manual Operation, Troubleshooting, Capabilities, IMPORTANT SAFETY INSTRUCTIONS - Read Before Using, Warranty