Fender 212R manual 6F M 2 1 2 R A m p l i f i e r, P a n e l F u n c t i o n s, F.Channel Select

6 F M 2 1 2 R A m p l i f i e r

Your new FM 212R amplifier delivers world–class Fender® tone and world–standard Fender® quality:

•100W output power into 4 ohms

•Selectable Normal and Drive channels with independent volume and tone controls

•MORE DRIVE pre-amp boost for instant gain saturation and harmonically rich leads

•MID-CONTOUR button allows for many different variations in distortion—from Rock to Blues to Metal to whatever!

•Classic Fender® spring Reverb

•Fender® “touch-sensitive” circuit design simulates the feel of tube distortion

•PRE-AMP OUT and POWER-AMP IN jacks allow you to connect external effects devices, other amplifiers or sound/recording equipment to your FM 212R

•FOOTSWITCH jack for use with a 2-button Fender® footswitch (included). A footswitch provides remote channel selection and drive/more drive switching

Thank you for choosing Fender®—The World’s most popular instrument amplifiers—since 1946

P a n e l F u n c t i o n s

12

INPUTS

VOLUME TREBLE MID BASS

	CH SELECT		MORE DRIVE				MID
DRIVE		VOLUME		TREBLE	MID	CONTOUR
								BASS

REVERB	FOOT	PRE	PWR
	SWITCH	OUT	IN	FENDER MUSICAL INSTRU

A.INPUT - Plug your guitar in here. INPUT 1 is normal sensitivity for most guitars, INPUT 2 is lower sensitivity for guitars with high output (active) pickups.

B.VOLUME - Adjusts the loudness of the Normal channel.

C.TREBLE/MID/BASS - Adjusts the high-, middle-, and low-frequency tones of the Normal channel.

D.DRIVE CHANNEL INDICATORS -

Yellow LED ON	Drive channel is active
Red LED ON	More Drive channel is active

E. DRIVE - Adjusts the distortion level of the Drive channel. Use together with VOLUME {G} to adjust the overall loudness of the Drive channel.

F.CHANNEL SELECT -

Button OUT selects the Normal channel

Button IN selects the Drive channel

G. VOLUME - Adjusts loudness of the Drive channel together with DRIVE {E}.

H.MORE DRIVE - Boosts the intensity and range of the DRIVE control {E}.

Button OUT	selects the Drive channel
Button IN	selects the More Drive channel

I.TREBLE/MID/BASS - Adjusts the high-, middle-, and low-frequency tones of the Drive channel

J.MID-CONTOUR- Activates a “scooped” midrange EQ useful for modern distortion sounds in the Drive channel.

K. REVERB - Adjusts the Reverb level for both channels.

L. FOOTSWITCH - Connect a 2-button Fender® footswitch (included) to this jack to enable remote switching of CH SELECT, and DRIVE/MORE DRIVE. When plugged in, the footswitch overrides the corresponding panel buttons.

M. PRE OUT/PWR IN - (1) Effects Loop - Connect PRE OUT to an effects device input, then connect the effects device output to PWR IN. (2) Multiple Amps

- Connect the primary unit’s PRE OUT to the auxiliary unit’s PWR IN. The primary unit is used to control all auxiliary units. (3) Recording or Reinforcement - Connect PRE OUT to sound equipment’s input.

Both jacks use a TS (Tip-Sleeve) standard type plug for connections. PRE OUT includes onboard tone shaping.

N.POWER INDICATOR - Lights up when the amplifier is on.

O. POWER - Switches the amplifier on and off.

P. POWER CORD SOCKET - Connect the included power supply cord in accordance with the voltage and frequency ratings listed on the rear panel of your amplifier.

www.f e n d e r.com ✧ www. m r g e a r h e a d .net