Rear Panel

L.

POWER—Switches the unit ON-OFF. You can extend the life of

P.

MAIN SPEAKER / EXTENSION SPEAKER—

 

the amplifier tubes by keeping the STANDBY {M} switch down

INTERNAL

EXTERNAL A speaker MUST be plugged into the INTERNAL SPEAKER

 

for the first 60 seconds that the power is ON.

M. STANDBY—In standby, the amplifier outputs are disabled

 

jack when the Super–Sonic amplifier is ON or damage may

 

occur. Switch the amplifier OFF, or to STANDBY while chang-

 

while power is supplied only to the tube filaments, keeping

 

ing speaker connections.

 

them warm. *Tip: Use STANDBY instead of switching the power

 

 

 

off during short breaks to extend the life of the tubes and

Keep the internal speaker connected to the INTERNAL SPEAKER

 

avoid the tube warm-up delay upon returning to play.

 

 

jack for normal operation.

 

 

 

N.

IEC POWER INPUT SOCKET—Connect to a grounded outlet

Q.

FOOTSWITCH—Connect the included 4-button footswitch to

 

using the supplied power cord in accordance with the voltage

 

 

enable remote selection of: Amp Voicing, Channel, FX Loop

 

and frequency specified on the rear panel of your amplifier.

 

 

 

Bypass and Reverb. NOTE: The front panel pushbuttons are dis-

 

 

 

O.

FUSE—Protects the amplifier from electrical faults. Only

 

abled when the footswitch is connected.

 

 

 

replace a blown fuse with the type and rating specified on the

R.

SEND / RETURN—Effects loop jacks. Connect SEND to your

 

 

rear panel of your amplifier.

effects input and connect RETURN to the effects output.

 

Specifications

TYPE:

PR 904

 

 

 

PART NUMBERS:

2160000x00* (120V, 60Hz)

2160001x00* (110V, 60Hz) TW

2160003x00* (240V, 50Hz) AUS

2160004x00* (230V, 50Hz) UK

 

2160005x00* (220V, 50Hz) ARG

2160006x00* (230V, 50Hz) EUR

2160007x00* (100V, 50Hz) JPN

2160009x00* (220V, 60Hz) ROK

*(Super-Sonic 22 amplifier exterior color code: Black "x"=0, Blonde "x"=4)

 

 

 

POWER REQUIREMENT:

120W

 

 

 

POWER AMP OUTPUT:

22W RMS @ 5% THD, 1kHz sine into 8Ω

 

 

 

INPUT IMPEDANCE:

1MΩ

 

 

 

OUTPUT IMPEDANCE:

 

 

 

FUSES

100V-120V UNITS: F 2A L, 250V

 

 

 

 

220V-240V UNITS: F 1A L, 250V

 

 

 

FOOTSWITCH (INCLUDED):

4-button, (P/N 0078324000) Voicing / Channel / FX on-off / Reverb

 

 

SPEAKERS:

One 8Ω, 12" Fender Special Design speaker by Eminence® (P/N 0079527000)

 

 

DIMENSIONS:

HEIGHT: 17.5 in (44.5 cm)

 

 

 

 

WIDTH: 24 in (61.0 cm)

 

 

 

 

DEPTH: 8.5 in (21.6 cm)

 

 

 

WEIGHT:

40 lb (18.1 kg)

 

 

 

Product specifications are subject to change without notice.

fender.com

 

7

 

 

Page 7
Image 7
Fender 22 manual Rear Panel, Specifications