Fender 40 manual Advanced, Customizing Presets, Software and Accessories, Specifications

BRONCO™ 40

The LEDs are numbered 1, 2, 3 and correspond to three posi- tions within each of the 4 selection ranges on each knob. Use the LEDs to determine exactly which position the knob is pointing to, for example, A1, A2 or A3 (A1 is shown below).

♫Please see the Advanced Owner's Manual for a table of all the effects on your Bronco 40 amplifier at: www. fender.com/support

Advanced

Customizing Presets

Your Bronco 40 amplifier gives you the powerful ability to save every setting on the amplifier as part of a preset. When you select a preset, the level of each knob, every effect and compression setting, and the amp model selection, are instantly recalled to your pre-programmed settings!

The SAVE button will light up red when you turn any programmable knob or edit any other setting on the amp. This indicates that you have temporarily modified the current preset. You can undo your modifications by turning the PRESET knob to a different preset and then back again.

Software and Accessories

So far we have covered the basics of your Bronco 40 amplifier, just enough to get you started. Please see the Advanced Owner's Manual at: www.fender.com/support to unlock the full potential of your amplifier. There are optional accessories, such as a footswitch that allows you to switch between two presets. Plus, there are custom software applications available for your PC or Mac.

For example, the Fender® FUSE™ application expands the potential of your amp enormously. Fender FUSE is a preset editor that provides easy on-computer-screen parameter control, and the ability to customize your Bronco 40 with deeper editing than what can be done with the amp alone.

And that's not all! There is also Ableton® Live Lite 8 Fender® edition, which turns your Bronco 40 and computer into a multi-track recording studio. Then there's Fender Amplitube™ software for exploring the wide world of Fender amplifier tone through your computer.

♫Software for your Bronco 40 amplifier is available, free of charge, at: www.fender.com/support

Specifications

TYPE:	PR1165
PART NUMBERS:	2302000000 (120V, 60Hz)	2302000900 (120V, 60Hz) DS	2302001900 (110V, 60Hz) TW DS
	2302003900 (240V, 50Hz) AUS DS	2302004900 (230V, 50Hz) UK DS	2302005900 (220V, 50Hz) ARG DS
	2302006900 (230V, 50Hz) EUR DS	2302007900 (100V, 50/60Hz) JPN DS	2302009900 (220V, 60Hz) ROK DS
POWER REQUIREMENTS:	110W
INPUT IMPEDANCE:	GUITAR: >1MΩ	AUX: >13kΩ
OUTPUT IMPEDANCE:	LINE OUT: 3.3kΩ
POWER OUTPUT:	40W RMS into 8Ω @ 5%THD
SPEAKER:	8Ω, 10"
FOOTSWITCH (OPTIONAL):	P/N: 099-4049-000 (Lets you switch between two Quick Access presets)
DIMENSIONS	HEIGHT: 15.25 in (38.7 cm)	WIDTH: 18 in (45.7 cm)	DEPTH: 11.25 in (28.6 cm)
WEIGHT:	30 lb (13.7 kg)

Product specifications are subject to change without notice.

f e n d e r . c o m 7