6 Fender® Rumble™ 60
Your new Rumble™ 60 delivers
•All front panel controls and jacks
•HEADPHONES jack for private listening
•
•LINE OUT jack for output to sound reinforce- ment or recording equipment
•CD IN RCA input jacks for use with a portable CD or tape player, drum machine, etc.
•Deltacomp™ adaptive limiter virtually eliminates
Fender® amplifiers are the result of over 50 years of experience and dedication that our engineers and countless musicians have gained in recording studios and on stages around the world.
Fender®, The Sound That Creates Legends.
Front Panel Functions
1.INPUT 1 – Input jack for most bass guitars.
2.INPUT 2 – Low gain input jack for bass guitars with active
3.MID SCOOP –
Button OUT |
|
| bypasses Mid Scoop |
|
| ||
|
| ||
Button IN |
| activates Mid Scoop | |
| |||
|
4.VOLUME – Adjusts the loudness of the amplifier.
5.EQUALIZER – Adjusts tone in 4 frequency bands. Each knob provides up to 15 dB of cut or boost with the center “0” position having no effect on the signal.
6.CD IN – RCA input jacks for use with a portable CD or tape player, drum machine, etc. These input jacks are not affected by the amplifier’s volume or tone controls. Adjust the signal at the source.
7.PRE AMP OUT – Connect this jack to the input of an external effects device.
8.POWER AMP IN – Connect this jack to the output of an external effects device.
9.HEADPHONES – Output jack for standard stereo or mono headphones. Using this jack automatically disconnects the speaker.
10.LINE OUT – Impdedance balanced TRS jack, Tip=(+),
11.POWER INDICATOR – Illuminates when the unit is ON.
12.POWER SWITCH – This switch turns the unit ON and OFF.
www.fender.com ✧ www.mrgearhead.net