Fender 700 MASTER

I. MID - Adjusts the overall tone quality of the

DRIVE channel . High Mid settings will empha-

size mid frequencies. A lower setting will notch

the midrange to produce the “crunch” sound

characteristic in most heavy metal music.

J. BASS - Adjusts the amount of low frequency

boost or cut in the Drive channel. This control is post

distortion and is useful for adjusting the amount of

“thump” or “chunk” produced by the drive channel.

K. DRIVE SELECT - When this button is pressed,

the amp switches from the Normal channel to the

Drive channel.

L. VOLUME - Adjusts the overall volume of the drive

channel .

M. REVERB - Adjusts the amount of reverb present

in both the Drive and Normal Channels.

N. FOOTSWITCH (INCLUDED) - Plug-in connec-

tion for the remote footswitch to select between the

normal and drive channels and to turn the reverb

effect on and off. Using the footswitch overrides the

front panel select buttons. NOTE: Any good quality

patch cord will work with the remote footswitch,

however, a speaker grade cord is preferable to a

coax guitar cord.

O. POWER INDICATOR - This LED is illuminated

when the power is ON.

P. POWER SWITCH - Turns the AC power ON

and OFF.

DRIVE SELECT

700

MASTER

Fender 700 owner manual MASTER