VE

 

 

 

FOOT

PRE

PWR

 

TREBLE

MID

BASS

REVERB

 

SWITCH

OUT

IN

FENDER MUSICAL INSTRUMENTS

L M N O P Q RS

K. MORE DRIVE - When this button is pressed in, drive channel gain is increased.

L. TREBLE - Adjusts the amount of increase or decrease in the high frequency range of the drive (distortion) channel.

M. MID - Adjusts the amount of increase or decrease in the middle frequency range of the normal drive (distortion) channel.

N. BASS - Adjusts the amount of increase or decrease in the low frequency range of the drive (distortion) channel.

O. REVERB - Adjusts the amount of reverb present in both the normal and drive channels.

P. FOOTSWITCH (INCLUDED) - Plug-in connection for the remote footswitch to select between the normal and drive channels and to select "More Drive". Using the footswitch overrides the front panel select buttons. NOTE: Any good quality patch cord will work with the remote footswitch, however, a speaker grade cord is preferable to a coax guitar cord.

Q. PRE OUT - This unbalanced jack provides an output signal from the preamp. It may be used to drive effects units in an effects loop, to drive additional amplifiers in a multi-amp set up, or as a preamp send to a mixing console.

R. PWR IN - This unbalanced jack provides a return from your effects units. This jack can also be used as a power amp input.

S. POWER JEWEL - This red jewel illuminates when your Deluxe 90 is receiving power.

5

Page 5
Image 5
Fender 90 owner manual N O P Q Rs