Bronco Front Panel Functions
| 5 | 6 |
| 5 | 6 |
| DRIVE | 5 | 6 |
| 5 | 6 |
| 5 | 6 |
| 5 | 6 |
|
|
| SELECT |
|
|
|
| |||||||||||||
4 |
| 9 | 4 |
|
| 9 | 4 |
| 9 | 4 |
| 9 | 4 |
| 9 | 4 |
|
| 9 |
3 |
| 10 | 3 |
|
| 10 | 3 |
| 10 | 3 |
| 10 | 3 |
| 10 | 3 |
|
| 10 |
2 |
| 11 | 2 |
| 12 | 11 | 2 |
| 11 | 2 |
| 11 | 2 |
| 11 | 2 |
| 12 | 11 |
|
| 12 |
|
|
|
|
| 12 |
|
| 12 |
|
| 12 |
|
|
| ||
INPUT |
| NORMAL |
|
| GAIN |
|
|
| DRIVE |
| TREBLE |
| MIDDLE |
|
| BASS |
| ||
VOLUME |
|
|
|
| VOLUME |
|
|
|
|
| |||||||||
A |
| B |
|
| C |
| D |
| E |
|
| F |
|
| G |
|
| H | I |
A.INPUT — A high impedance, high sensitivity
B.NORMAL VOLUME — Adjusts the overall loudness of the Normal Channel.
C.GAIN — Adjusts the amount of preamp amplification in the Drive Channel. Cleaner sound is achieved at lower gain settings; high gain settings will produce more sustain and distortion. This control works in conjunction with the DRIVE VOLUME control (item E) to set the overall loudness of the Drive Channel.
D.DRIVE SELECT — Activates the Drive Channel.
E.DRIVE VOLUME — Adjusts the overall loudness of the Drive Channel.
F.TREBLE — Adjusts the amount of boost or cut in the high frequency range.
G.MIDDLE — Adjusts the overall tone quality without affecting the signal level. High MIDDLE settings will provide emphasis in the midrange frequencies whereas a lower setting will notch the midrange to produce sounds characteristic of most “metal” music.
H.BASS — Adjusts the amount of boost or cut in the low frequency range.
I.POWER INDICATOR
J.POWER SWITCH — This switch turns the AC power ON and OFF. When the switch is OFF the amplifier is completely shut down.
K.HEADPHONES — This jack provides an output to standard stereo or mono headphones for private listening. NOTE: Use of this jack automatically disables the speaker. CAUTION: Prolonged listening at high levels may be hazardous to your hearing! This jack can also be used as an unbalanced line output by using either a stereo or mono 1/4 inch phone plug connection.
L.EXTERNAL SPEAKER
external speaker enclosure. The enclosure must have a minimum impedance of 8Ω . Use of this jack automatically disables the internal speaker. DO NOT PLUG HEAD PHONES IN HERE.
LINE CORD
8Ω MIN. EXT.
SPEAKER