Ferris Industries 5900301, 5900302, 5900559, 5900784, 5900786, 5900787, 5900788, 5900791, 5900792, 5900793, 5900794, 5900795, 5900872, 5900873, 5900969 INSPECTION AND MAINTENANCE OF THE ROLL BAR SEAT BELT

Not for

Reproduction

10

INSPECT BUCKLE

& LATCH

INSPECT WEBBING

Operator Safety

WARNING

Failure to properly inspect and maintain the

seat belt can cause serious injury or death.

INSPECTION AND MAINTENANCE OF

THE ROLL BAR SEAT BELT

• The seat belt like the ROLL BAR, needs to

be periodically inspected to verify that the

integrity has not been compromised through

normal machine use, misuse, age degradation,

modifications, or a roll over. If the seat belt does

not pass all of the following tests, it should be

replaced.

• BEFORE EACH USE – Conduct the following

inspections/maintenance of the seat belt and

retraction mechanism:

1) Check for dirt or debris in the retraction

mechanism. If dirt or debris is found, it should

be removed.

2) Check to make sure the retraction mechanism

retracts easily and completely.

3) Check for damage to any part of the seat belt

such as nicks, cuts, loose stitching, or fraying.

4) Check that the buckle and latch operate

properly and that the latch plate is not

excessively worn, deformed, or the buckle is

damaged or cracked. The seat belt should

latch and release easily.

Contents

Main OPERATORS MANUAL IS3100Z Series Zero-Turn Riding Mower Zero-Turn Rider & Mower Deck Zero-Turn Rider Page Table of Contents Operator Safety .................................................. 2 Features & Controls ......................................... 14 Operation ........................................................... 16 Regular Maintenance ....................................... 25 Operating Safety Read the Manual Children Slope Operation Thrown Objects Moving Parts Roll Bar Use Retaining Walls, Drop- offs, and Water Overhead Obstacles Enclosed Areas Fuel and Maintenance TRAINING PREPARATION OPERATION SLOPE OPERATION TOWED EQUIPMENT (RIDE-ON UNITS) CHILDREN EMISSIONS IGNITION SYSTEM (GASOLINE MODELS) SERVICE AND MAINTENANCE ROLL BAR INSTRUCTIONS INSPECTION AND MAINTENANCE OF THE ROLL BAR SEAT BELT Identification Numbers SAMPLE Safety Alert Symbol and Signal Words DANGER CAUTION or NOTICE Safety Icons Safety Interlock System Operational SAFETY Checks Control Functions Ground Speed Levers Seat Adjustment Lever A Features and Controls Features & Controls A Operation General Operating Safety Checks Before Starting Starting the Engine Stopping the Rider Pushing the Rider by Hand DO NOT TOW RIDER Zero-Turn Driving Practice BASIC DRIVING ADVANCED DRIVING Mowing Mowing Recommendations Mowing Methods Proper Broadcast Mowing Attaching a Trailer Raise & Lower the Roll Bar Storage Starting After Long Term Storage Maintenance Maintenance Schedule & Procedures RIDER MAINTENACE ENGINE MAINTENANCE Check Engine Oil Level Checking / Adding Fuel Fuel Filter Change Oil & Filter Check Tire Pressures Check Hydraulic Oil Level Hydraulic Oil Filter Change Inspect Muffler and Spark Arrester PRESSURIZED SYSTEM Cooling System (Liquid Cooled Models Only) Lubrication Battery Maintenance Anti-Scalp Deck Casters Servicing the Mower Blades DANGER Page Troubleshooting TROUBLESHOOTING THE RIDER 34 www.ferrisindustries.com RIDER TROUBLESHOOTING CONTINUED. PROBLEM CAUSE REMEDY TROUBLESHOOTING THE MOWER PROBLEM CAUSE REMEDY 35 TROUBLESHOOTING COMMON CUTTING PROBLEMS PROBLEM CAUSE REMEDY Seat Adjustment Ground Speed Control Lever Adjustment Seat Adjustment (Suspension Seat) Neutral Adjustment Speed Balancing Adjustment Parking Brake Adjustment Return-to-Neutral Adjustment Suspension Adjustment Cutting Height Adjustment Foot Pedal Adjustment Floor Pan Removal & Installation - (S/N: 2016270589 & Above) Deck Lift Rod Timing Adjustment (S/N: 2016270588 & Below) Deck Lift Rod Timing Adjustment (S/N: 2016270589 & Above) Deck Leveling Adjustment Deck Lift Spring A AA PTO Clutch Adjustment Blade Brake Check Hydraulic Pump Drive Belt Replacment FRONT Mower Belt Replacment To avoid damaging belts, DO NOT PRY BELTS OVER PULLEYS. B attery Service Page Specifications ENGINE Specifications CHASSIS TRANSMISSIONS: (Pumps) (Wheel Motors) THIS IS A 15 DEGREE SLOPE THIS IS A 10 DEGREE SLOPE Page Page Page BRIGGS & STRATTON PRODUCTS WARRANTY POLICY September 2012 LIMITED WARRANTY WARRANTY PERIOD ABOUT YOUR WARRANTY Manufacturers Warranty Coverage: Owners Warranty Responsibilities: Briggs & Stratton Emissions Control Warranty Provisions