21 Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
22 Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.
Service
23Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
24When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorised parts or failure to follow Maintenance instructions may create a risk of electric shock or injury.
Various dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from chemically- treated lumber.
The risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
|
|
|
|
Technical data |
| ETS 150/3 EQ | ETS 150/5 EQ |
Wattage | W | 310 | 310 |
No load speed | rpm | 6 000 - 10 500 | 6 000 - 10 500 |
No. of strokes | spm | 12 000 - 21 000 | 12 000 - 21 000 |
Sanding stroke | mm (in.) | 3.0 (0.12) | 5.0 (0.20) |
Sanding base, Ø | mm (in.) | 150 (5.9) | 150 (5.9) |
Weight | kg (lbs) | 1.8 (4.0) | 1.8 (4.0) |
Safety level | UL 745, CSA C22.2 No. 745 | |||
|
|
|
|
|
| Symbols |
| The user bears sole responsibility | |
V | Volts |
| for any damage or accidents resulting from | |
| incorrect use. | |||
A | Amperes |
| ||
|
|
| ||
Hz | Hertz |
|
|
|
| Electrical connection and operation | |||
W | Watt |
| The mains voltage must correspond with the | |
| Alternating current |
| ||
|
| voltage on the rating plate! | ||
n0 | No load speed |
| ||
| See the following figure for connection and dis- | |||
| Class II Construction |
| ||
|
| connection of the power cable. | ||
rpm | Revolutions per minute |
| ||
| Always switch the machine off | |||
spm | Strokes per minute |
| ||
Ø | Diameter |
| before connecting or disconnecting the power | |
Intended use | cable! |
| |
The sanders are designed for sanding wood, |
|
plastic, composite materials, paint / varnish, |
|
filling material and similar materials. |
|
Metal and materials with an asbestos content |
|
must not be processed with these tools. |
|
The machines must not be damp nor operated |
|
in a damp environment for electrical safety |
|
reasons. The machines may only be used for |
|
dry sanding. |
|
3
