dust extraction. Order numbers can be found in the corresponding brochures.

The Stickfix abrasives are simply pressed onto the Stickfix sanding pad and pulled off after use.

If the front tip of the abrasive has become worn it can be removed from the sanding pad, rotated around 120° and replaced.

Accessories, tools

For safety reasons, only use original Festool accessories and tools!

The accessory and tool order number can be found in the Festool catalog or on the Internet under www.festool-usa.com.

Systainer

Many Festool products are shipped in a unique system container, called "Systainer". This provides protection and storage for the tool and acces- sories. The Systainers are stackable and can be interlocked together. They also can be interlocked atop Festool CT dust extractors.

4.3

4.2

4.1

-Place one systainer on top of the other.

-Release all four latches on the lower systainer by pulling back at their top edges (4.1).

-Slide all four latches upward (4.2).

-Snap all four latches back to their flat position (4.3) so they engage the stacking tabs of the upper systainer.

Maintenance and care

Always disconnect the machine at its mains plug before performing maintenance work!

Any maintenance and repair work re- quiring the motor casing to be opened may only be carried out by an authorised service workshop.

The vent openings on the motor casing must always be kept clean and free to ensure a good circulation of air.

The device is fitted with self-disconnecting special brushes. If these become worn the power is au- tomatically interrupted and the device comes to a standstill. Any maintenance and repair work re- quiring the motor casing to be opened may only be carried out by an authorised service workshop.

Warranty

Conditions of 1+2 Warranty

You are entitled to a free extended warranty (1 year + 2 years = 3 years) for your Festool power tool. Festool shall be responsible for all shipping costs during the first year of the warranty. Dur- ing the second and third year of the warranty the customer is responsible for shipping the tool to Festool. Festool will pay for return shipping to the customer using UPS Ground Service. All warranty service is valid 3 years from the date of purchase on your receipt or invoice.

Festool Limited Warranty

This warranty is valid only on condition that the tool is used and operated in compliance with the Festool operating instructions. Festool warrants, only to the original consumer purchaser, that the specified tool will be free from defects in materi- als and workmanship for a term of one year from the date of procurement. Festool makes no other warranty, express or implied, for Festool portable power tools. No agent, representative, distributor, dealer or employee of Festool has the authority to increase or otherwise change the obligations or limitations of this warranty. The obligations of Festool in its sole discretion under this warranty shall be limited to the repair or replacement of any Festool portable power tool that is found to be defective as packaged with the User Manual.

Excluded from coverage under this warranty are: normal wear and tear; damages caused by mis- use, abuse or neglect; damage caused by anything other than defects in material and workmanship. This warranty does not apply to accessory items such as circular saw blades, drill bits, router bits, jigsaw blades, sanding belts, and grinding wheels. Also excluded are “wearing parts”, such as carbon brushes, vanes of air tools, rubber collars and seals, sanding discs and pads, and batteries.

Festool portable power tools requiring replace- ment or repair are to be returned with the receipt of purchase to Festool (call 800-554-8741 for address details).

IN NO EVENT SHALL FESTOOL BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDEN- TAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED WHATSOEVER. ALL WARRANTIES

5

Page 5
Image 5
Festool DX 93 E, PI567856 Accessories, tools, Systainer, Maintenance and care, Warranty Conditions of 1+2 Warranty