FieldServer FS-8700-15 instruction manual Client Side Node Descriptors, Client Side Connections

FS-8700-15 Modbus Daniels Manual									Page 4 of 7
				device is connected to the				FS-X20 Serves: Serial Port
				FieldServer
	Protocol			Specify protocol used				Modbus_Daniels
	Baud*			Specify baud rate				110 – 115200, standard baud
								rates only, 9600
	Parity*			Specify parity				Even, Odd, None, Mark,
								Space
	Data_Bits*			Specify data bits				7, 8
	Stop_Bits*			Specify stop bits				1
	Handshaking*			Specify hardware				RTS, RTS/CTS, None
				handshaking
	Poll _Delay*			Time between internal polls				0-32000 seconds, 1 second
	Example
	//	Client Side Connections
	Connections
	Port,		Protocol,		Baud,	Parity,	Handshaking,		Poll_Delay
	P1,		Modbus_Daniels,		9600,	Even,	None,		0.100s

4.3.Client Side Node Descriptors

Section Title
Nodes
Column Title		Function		Legal Values
Node_Name	Provide name for node			Up to 32 alphanumeric
				characters
Node_ID		Modbus station address of	1-255
		physical server node
Protocol	Specify protocol used		Modbus_Daniels
Connection		Specify which port the device is		FS-X40 Serves: P1-P8, R1-R2
		connected to the FieldServer		FS-X20 Serves: Serial Port

Example

//Client Side Nodes

Nodes
Node_Name,	Node_ID,	Protocol,	Connection
PLC 1,	1,	Modbus_Daniels,	P1

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com