![](/images/new-backgrounds/1294529/29452921x1.webp)
TANK INSTALLATION
INSTALACI”N DEL TANQUE
Insert Tank Bracket into Slot, Rotate 90 Degrees.
Slide Down Over Tank Ring to Hold Tank in Place.
Inserte el soporte del tanque en ranura, rote 90 grados.
Resbale abajo sobre el anillo del tanque hacia el tanque del asimiento en lugar.
IMPORTANT: Ensure hose
assembly does not contact the casting, or any other parts which will get hot. IMPORTANTE: asegure el
ensamblaje de manguera no entra en contacto con el bastidor, o ningunas otras piezas que consigan calientes.
Regulator Connection Facing Front. Frente De los Revestimientos De la Conexión Del Regulador
WARNING: Before proceeding with the following steps, ensure you have read L.P. Gas Cylinder Hose and Regulator sections of the USE AND CARE MANUAL. The L.P. cylinder, if supplied with your grill, has been shipped empty for safety reasons. The cylinder must be purged of air and filled prior to use. Follow all directions under L.P. Gas Cylinder Filling section of the USE AND CARE MANUAL.
11