Final Sound S100 user manual Cabinet Care, Specifications

8. CABINET CARE

The finish on the S100 is a high strength, scratch-resistant acrylic.. However, as with all fine furniture finishes the cabinet can still be scratched..

Always unplug the S100 prior to cleaning..

Do not clean or dust the cabinet with any abrasive cleaner.. Use only a fine quality spray or wipe-on furniture/dust cleaner..

Do not use any abrasive rag or scrubber.. Use only a lint-free clean cloth..

Never use a liquid to clean the cabinet or amplifier..

9. SPECIFICATIONS

Size	30cm cube, with 5cm high feet
Weight	16 kilograms
Anechoic Frequency Response	30 Hz to 250 Hz, ±3 dB
In-Room Frequency Response	Typically 25 Hz to 250 Hz, ±3 dB
THD	Less than 3% THD at 94 dB SPL from 30 Hz and up
Maximum Output	110 dB SPL in room
Amplifier Type	Discrete class A/B with linear power supply
Volume Adjustment	60 dB of range
Crossover Frequency	40 Hz to 250 Hz
Crossover Type	2nd order Butterworth (12 dB/octave, Q=0..707)
Subsonic Filter	2nd order Butterworth at 22 Hz
Phase Adjustment	Selectable between 0 to 180 degrees
Power Output	100W RMS/200W Peak
Power Consumption	200W RMS on/12W in standby
Low Level Input Impedance	20 kΩ
High Level Input Impedance	2 kΩ
Effective Internal Volume	22 liters sealed with 400 grams of polyester stuffing
Driver	20 cm long throw driver with XBL2 motor technology

8 Contents Copyright 2006 Final Sound Solutions.