864TRV Arched Face
3 Install the face following the directions below.
Attach the upper brackets a to the face with the
included nuts.
The face is secured to the fireplace c with four screws. Two of the screws
are fastened to the upper brackets with press nuts. The lower screws are included with the face.
Slide the face into place. The b tabs on the upper brackets insert
into the slots on the fireplace brackets, holding the face in place while the screws are tightened.
Plated Surfaces
Use denatured alcohol and a soft cloth to clean plated surfaces. Marks
left on the surface may damage the face.
Denatured
Alcohol
Soft Cloth
Page 4 of 4 | 5/3/07 | © Travis Industries, Inc. |