FireplaceXtrordinair 95400413, 95400411 manual 564 SS / 564 E Rectangular Face

564 SS / 564 E Rectangular Face

Black 95400411 Nickel 95400413

2Place the face, face down, on a soft, non-scratching surface. Install the 564 Electric mounting brackets onto the back of the face.

a	Remove and
	discard the
	hinge assembly
	from the face.

Attach the upper 564 E c bracket (and shim). Use the

nuts included with this kit.

Attach the lower 564 E bracket (and b shim). Use the nuts removed earlier and

one of the nuts included with this kit.

d	Repeat steps “a” through
	“c” for the opposite side.

Before installing the e face verify the lower

grill is centered. Loosen the nuts and adjust if necessary.

3Pull the electric fireplace out of the mantel (or built-in location). Attach the cove covers and face following the directions below. Slide the fireplace back into place to complete the installation.

b

Lift the face up slightly, tilt it forward and insert the top hooks until the face locks in place.

a

Tilt the face back slightly and

insert the bottom hooks into

the slots on the fireplace.

Page 6 of 6 7/19/07 © Travis Industries, Inc.