How do I enter a new personal passcode?

Enter a 3-8 digit passcode followed by the A or B key. The ready light will flash along with a beep, and the green light will indicate successful entry.

What should I do if the safe fails to open with my personal passcode?

Check the batteries and replace if necessary. If a lock-out occurs, wait 15 minutes before trying again, or contact SISCO / BRK Consumer Affairs Department.

How do I close the safe for added security?

To lock the safe, press the handle down. If the handle is not fully closed, the safe will remain unlocked or will not re-open.

Testing Personal Passcode, Personal Passcode entry

Testing Personal Passcode

Personal Passcode entry

Enter new code: 3-8 digits followed by the “A” or “B” key. Ready light flashes along with a beep

Green light

1	2	3
4	5	6
7	8	9
A	0B

Lift the handle within 5 seconds. The safe automatically relocks in 5 seconds if you take no action

Hold the handle and pull the door open

TROUBLE

SHOOTING:

If safe fails to open with your Personal Passcode, try the following:

1.Check to see if the batteries have been installed properly and replace if necessary.

2.Lock-out may have occurred. Wait 15 minutes before trying again.

3.Contact SISCO / BRK Consumer Affairs Department.

SECURITY LOCK-OUT PERIODS:

Important:

If your safe has an interior light, the switch is located inside the safe door.

NOTE: The batteries will run down if you do not turn off the light. The light bulb is not user replaceable.

Closing safe

For added security, the safe will automatically “Lock-out” entry for 15 minutes after three attempts to open with an invalid Passcode.

To lock the safe, press the handle down. If the handle is not

fully closed, the safe will remain unlocked or will not re-open	3

First Alert 2074F, 2079EF, 2074EF Testing Personal Passcode, Personal Passcode entry, Closing safe

Models: 2079F 2079EF 2074F 2074EF