USER’S MANUAL

120V PLUG-IN CARBON MONOXIDE ALARM WITH

BATTERY BACK-UP AND SILENCE FEATURE

120V AC ~,

60 Hz, 0.09A

M08-0153-002 S 12/06 Printed in Mexico

Model CO605

IMPORTANT!

PLEASE READ CAREFULLY AND SAVE.

This user’s manual contains important information about your Carbon Monoxide (CO) Alarm’s operation. If you are installing this CO Alarm for use by others, you must leave this manual—or a copy of it—with the end user.

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Basic Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

How Your CO Alarm Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Understanding Your CO Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Where to Install CO Alarms

2

Where CO Alarms Should NOT Be Installed

2

How to Install Your CO Alarm

3

If Your CO Alarm Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

If the Alarm Signal Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Using the Silence Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Testing and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Weekly Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

What You Need To Know About CO . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

What is CO?

4

Symptoms of CO Poisoning

4

Finding the Source of CO After an Alarm

4

How Can I Protect My Family?

4

Potential Sources Of CO In The Home

5

Underwriters Laboratories Inc. UL2034

5

General Limitations Of CO Alarms

5

Troubleshooting Guide

6

Limited Warranty

6

© 2006 BRK Brands, Inc., a Subsidiary of Jarden Corporation

 

All rights reserved.

 

BRK Brands, Inc., 3901 Liberty Street Road, Aurora, IL 60504-8122

 

Consumer Affairs: (800) 323-9005 • www.firstalert.com

 

INTRODUCTION

BASIC SAFETY INFORMATION

Dangers, Warnings, and Cautions alert you to important operating instructions or to potentially hazardous situations. Pay special attention to these items.

THIS IS NOT A SMOKE ALARM! This CO Alarm is designed to detect carbon monoxide from ANY source of combustion. It is NOT designed to detect smoke, fire, or any other gas.

This CO Alarm is approved for use in single-family residences.

This CO Alarm will only indicate the presence of carbon monoxide gas at the sensor. Carbon monoxide gas may be present in other areas.

The Silence Feature is for your convenience only and will not correct a CO problem. Always check your home for a potential problem after any alarm. Failure to do so can result in injury or death.

This CO Alarm should receive continuous 120VAC, 60 Hz, pure sine wave electrical power. (The battery is meant for emergency back-up only). Do not use in an extension cord or outlet controlled by a dimmer or switch. In order for the emergency battery back-up to work, a working (fresh) battery must be properly installed.

NEVER ignore your Carbon Monoxide Alarm if it alarms. Refer to “If Your CO Alarm Sounds” for more information. Failure to do so can result in injury or death.

Test the CO Alarm once a week. If the CO Alarm ever fails to test correctly, have it replaced immediately! If the CO Alarm is not working properly, it cannot alert you to a problem.

This product is intended for use in ordinary indoor locations of family living units. It is not designed to measure CO levels in compliance with Occupational Safety and Health Administration (OSHA) commercial or industrial standards. Individuals with medical conditions that may make them more sensitive to carbon monoxide may consider using warning devices which provide audible and visual signals for carbon monoxide con- centrations under 30 ppm. For additional information on carbon monoxide and your medical condition contact your physician.

HOW YOUR CO ALARM WORKS

GENERAL INFORMATION

Leave your CO Alarm plugged in year-round. CO problems can occur any time during the year, and this Alarm can only alert you if it is plugged in and receiving power.

This CO Alarm is intended for use in a standard, unswitched 120V AC wall outlet. It is not intended for use in extension cords, power strips, or outlets controlled by a switch or dimmer. These may not provide continu- ous power to the unit. When fully powered, the unit samples the air and takes a new reading about every second. A microchip inside the unit stores each reading, and remembers the levels of CO it has been exposed to over time. The Alarm sounds when it has been exposed to a “critical” level of CO (measured in parts per million or “ppm”) within a specified time (measured in minutes). This CO Alarm features a perma- nently installed sensor, an indicator light, and an 85dB alarm horn. It also has a Silence Feature to temporarily quiet the alarm horn.

MALFUNCTION WARNING

This unit performs self-diagnostic tests. If the Alarm malfunctions, it should be replaced immediately. See "IF THE CO ALARM IS NOT OPER- ATING PROPERLY" for more information.

THE PARTS OF YOUR CO ALARM

1

2

3

4 5

1Open door here

2Test/Silence Button

3POWER/ALARM Light (Red)

4Battery Compartment

5(Behind Cover) Alarm Horn: 85 dB audible alarm for test, alarm, and unit malfunction warning.

1

Page 1
Image 1
First Alert CO605 user manual Introduction, USER’S Manual, Table of Contents, HOW Your CO Alarm Works

CO605 specifications

The First Alert CO605 is a state-of-the-art carbon monoxide (CO) detector designed to protect homes and families from the dangers of carbon monoxide poisoning. As an essential safety device, the CO605 combines modern technology with user-friendly features to ensure peace of mind for homeowners.

One of the primary features of the CO605 is its advanced electrochemical sensor technology. This high-quality sensor provides reliable and accurate detection of carbon monoxide levels, ensuring that families are alerted to dangerous gas levels before they reach harmful concentrations. The device can detect low levels of CO, offering early warning to users and enhancing their safety.

The CO605 is battery-operated, which ensures that it remains functional during power outages—an important consideration during emergencies. The use of batteries also simplifies installation, allowing users to place the unit anywhere in their home without the need for complex wiring or access to power outlets.

Another significant characteristic of the CO605 is its continuous digital display. This LCD display continuously shows real-time CO levels, allowing users to monitor air quality at a glance. Additionally, an LED status indicator provides clear visual alerts, making it easy to understand the unit's operational status.

The device is equipped with a loud 85-decibel alarm that triggers when hazardous CO levels are detected. This alarm system ensures that occupants are immediately alerted to potential danger, prompting timely evacuation and response to the situation.

User convenience is a priority with the CO605; it features a simple one-test button for quick functionality checks, ensuring that the unit is always in working order. The unit also comes with an end-of-life signal that notifies users when the detector needs to be replaced, helping to ensure uninterrupted protection.

Compact and sleek in design, the CO605 can easily blend into various home interiors. Its lightweight construction makes installation straightforward, whether mounted on a wall or placed on a shelf.

Overall, the First Alert CO605 is a robust and vital component of any home safety plan. With high-quality detection technology, user-friendly features, and a reliable alert system, it safeguards families against the silent threat of carbon monoxide, making it an essential addition to any household.