INSTALLATION
MOUNTING & PAIRING 3
INSTALLING CAMERAS
1. Select the position for the camera and secure the camera stand. (Screws and anchors are supplied. Use an appropriate screw type for the mounting surface.)
2. Screw the camera onto the bracket.
3.Adjust camera to the proper view angle Make sure the lens is upright relative to your subject.
Tighten the thumb bolt.
4. Screw the antenna into place on the rear of the camera. Adjust the antenna to an upright position.
5. Connect the power cable to the DC IN of the camera.
6. Plug the power supply into the electrical outlet.
Camera Orientation
It’s important the camera is mounted correctly to ensure the image is not upside down as the camera lens can only be positioned one way.
CAMERA PAIRING
Camera
Use 
to select the camera to set up
Use 
to select PAIRING, BRIGHTNESS and CAMERA ON/OFF settings.
With PAIRING section highlighted, press 
MENU key once to begin camera pairing. Press Pairing Key button on Camera cord. Pairing LED on camera will blink once then will begin blinking continuously indicating data transmission is in process.
System will confirm pairing process is successful with “PAIRED” displaying on screen. System will indicate pairing process failed with “PAIRING FAIL” displaying on screen.
Press ESC to return to main menu.
Camera
Pairing Key
Page 5
