Ð22Ð
QUICK GUIDE TO SYSTEM FUNCTIONS
FUNCTION PROCEDURE COMMENTS
Silence Alarm,
Supervisory or
Trouble sounds
Press the SILENCE/RESET button or
Enter user Code + OFF key.
SILENCED LED lights. Memory of fault remains until cleared.
Keypad displays # of faulted zone.
Reset Smoke
Detectors &
Displays
Press the SILENCE/RESET button a second
time or
Re-enter user Code + OFF key.
Will reset only if fault corrected.
Manually Trip
Emergency
Alarms
Press key [A], [B], or [C] for at least 2 sec., or
press keys [1]&[✱], or [✱]&[#], or [3]&[#],
both at same time.
Key(s) must be enabled by installer.
Bypass
Emergency
Zone(s)
To bypass, enter user code + BYPASS key +
zone number(s) (use 2-digit entries).
To remove bypass, enter user code + OFF key.
Bypassed zones will not cause an alarm if violated.
Fire Drill Test To activate: Enter User Number 2's code + # +
6 + 9.
To turn off: Enter any user code + OFF key.
Activates external fire alarm sounders.
Assign, change,
or delete user
code.
To assign or change: Enter User Number
2's code + CODE key + user number (2Ð6)
+ new code.
To delete: Enter User Number 2's code + CODE key +
user number (3Ð6) and stop.
Note:
User Number 2 can
change but not delete his/her own code.