Ð20Ð
TROUBLE CONDITIONS
¥ A trouble message is sent to the central station.
Note:
If your keypad LCD displays "0C" for more than 5 minutes, then it is not
receiving signals from the control. CALL YOUR INSTALLER IMMEDIATELY FOR
SERVICE.
Silencing
and Resetting
a Trouble Indication
To silence the control and keypad
buzzers:
Press the control's SILENCE/RESET
button or enter your User Code, + the
OFF key.
The keypad's LCD will display the
number of the zone in trouble as
a Memory indication.
To reset the keypad trouble display:
First have the cause of the trouble
condition corrected, and then:
Press the SILENCE/RESET button again
or re-enter your User Code, followed by
the OFF key.