Ð18Ð
SUPERVISORY CONDITIONS
General If your building has a fire sprinkler system, your installer may have installed a
sensor which monitors the sprinkler system (e.g., to determine whether the main
water gate valve is open or that there is adequate water pressure, etc.). Your
system provides the following indications when a supervisory condition is
detected.
CALL YOUR INSTALLER IMMEDIATELY FOR SERVICE WHEN A
SUPERVISORY INDICATION APPEARS!
¥ The control's buzzer and the keypad buzzer both produce a rapid on/off pulsing
sound.
¥ The keypad LCD (Fixed-Word) displays the word "SUPV" and the number of
the zone with the supervisory condition. Alpha keypads also display a
description of the zone.
SUPV 04
SPRINKLER VALVE
ALARM
AWAY
BYPASS
STAY
SUPV NO AC
PHONE TEST
NOT READY
CHIME BAT
FIRE CHECK INSTANT TAMPER
04
ALPHA FIXED-WORD
¥ A supervisory message is sent to the central station.
Silencing
and Resetting
a Supervisory
Indication
To silence the control and keypad
buzzers:
Press the control's SILENCE/RESET
button or enter your User Code, + the
OFF key
The keypad's LCD will display the
number of the zone having the
supervisory condition as a Memory
indication.
To reset the keypad supervisory
display: First have the cause of the
indication corrected, and then:
Press the SILENCE/RESET button again
or re-enter your User Code, followed by
the OFF key.