CAT.GCO1B
CO
TOP VIEW | SIDE VIEW | BACK VIEW |
3.1"
5.7" | 2.5" |
ARCHITECTURAL AND ENGINEERING SPEC
The explosive gas/CO combination alarm shall be a First Alert Model GCO1 and shall provide at a minimum the following features and functions:
1.An electrochemical CO sensor and a metal oxide explosive gas sensor.
2.The unit shall have a digital display with peak CO memory feature
3.The unit shall be capable of self restoring and provide an end of life timer.
4.120V AC powered with a 9V alkaline battery backup and a solid state piezo horn rated at 85dB at 10 ft.
5.A visual green LED
6.A full function test button should check all alarm functions by simulating an explosive gas and CO condition, causing the unit to alarm.
7.Two Silence features - Low Battery Silence: Silence low battery chirp for up to 8
hours. Alarm Silence: Temporarily silence unwanted nuisance alarms.
8.An infrared remote (IR) feature to test and/or silence the alarm with most standard IR remote controls.
9.The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 95%.
10.The unit shall contain mounting hardware and shall be listed for wall mounting.
11.The unit shall at a minimum meet the requirements of UL1484, UL2034, NFPA 720, ICC.
INSTALLATION OF ALARM
Installation of this alarm must conform to NFPA 720. Always check your local building codes. Follow all instructions for placement as outlined in the user’s manual.
THE PARTS OF THIS GAS/CO ALARM
TECHNICAL SPECS
Alarm Dimensions: | 3.1”H x 5.7"L x 2.5"D |
| ||
Weight: | 9.6 oz. |
|
| |
Operating Voltage: | 120V AC with 9V Alkaline Battery Backup |
| ||
Temperature Range: | 40F (4C) to 100F (38C) |
| ||
|
|
| ||
Humidity Range: | 10% to 95% relative humidity (RH) |
| ||
|
|
| ||
Audio Alarm: | 85dB at 10 feet |
| ||
Test/Silence: | Electronically simulates both explosive gas and CO |
| ||
|
| conditions, causing the unit to alarm or temporarily |
| |
|
| silence the alarm |
| |
| Remote: | Use vol/chn buttons on most household IR remotes. |
| |
| Manual: | Press and hold test/silence button |
| |
|
|
| ||
Alarm Reset: | Automatic when explosive gas and/or CO clears |
| ||
|
|
| ||
CO Sensor: | Electrochemical |
| ||
Gas Sensor: | Thick film metal oxide |
| ||
Indicator Lights/Sounds: |
|
|
| |
| AC Power: | Constant green light |
| |
| DC Power: | Intermittent green Light |
| |
| Gas Alarm: | Audio Alarm (continuous beeps), rapidly flashing red light |
| |
| CO Alarm: | Audio Alarm (4 beeps, pause, 4 beeps), rapidly |
| |
|
| flashing red light |
| |
| Digital Display: | Displays hazard (Gas or CO), battery level or CO levels in |
| |
|
| parts per million (PPM) |
| |
|
|
| ||
Listing: | ETL to UL1484 and 2034 Standards |
| ||
SHIPPING SPECS: |
|
| ||
Individual Carton Dimensions | 5.813 ”L x 2.938”W x 3.438”H |
| ||
| Weight |
| 0.69lbs. |
|
| Cube |
| 0.034 ft3 |
|
| UPC |
| 0 29054 00045 3 |
|
|
|
|
| |
Master Carton Dimensions | 9.125”L x 7.125”W x 6.313”H |
| ||
Master Pack |
| 6 |
| |
Weight |
| 4.35lbs. |
| |
| Cube |
| 0.238 ft3 |
|
| UPC |
| 600 29054 00045 5 |
|
|
|
|
|
|
Pallet Information |
|
|
| |
| Cases per Layer |
| 27 |
|
| Number of Layers |
| 7 |
|
| Cases per Pallet |
| 189 |
|
| Units per Pallet |
| 1,134 |
|
| Cube |
| 55.2 ft3 |
|
| Weight |
| 887 lbs. |
|
|
|
|
|
|
3
2
1
1.Test/Silence button & remote control sensor
2.Power Light (GREEN)
3.Display
4.Alarm Horn (behind cover)
5.Display Button: Press to recall highest CO level recorded.
6.9V Battery compartment
©2009 BRK Brands, Inc. a Jarden Corporation |
Company (NYSE: JAH) |
3901 Liberty Street Road |
Aurora, IL |
4 | 5 |
|
6
| All rights reserved |
brkelectronics.com | First Alert is a registered trademark of the First Alert Trust |
BRK is a registered trademark of BRK Brands, Inc. | |
| CM2914 |
