First Alert SC05B Architectural And Engineering Spec, Installation Of Alarm, Technical Specs

Models: SC05B

1 2
Download 2 pages 60.19 Kb
Page 2
Image 2
ARCHITECTURAL AND ENGINEERING SPEC

CAT.SCO5B

TOP VIEW

SIDE VIEW

MOUNTING

BRACKET

5.0"

2.0"

ARCHITECTURAL AND ENGINEERING SPEC

The smoke/CO combination alarm shall be a First Alert Model SCO5 and shall provide at a minimum the following features and functions:

1.A Photoelectric smoke sensing chamber and an electrochemical CO sensor.

2.The unit shall have a lower and varying horn frequency to to make it easier for the elderly with normal age related hearing loss to better hear the horn

3.The unit shall be capable of self restoring.

4.Fully screened smoke sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms.

5.Powered by supervised 2 AA alkaline batteries and a solid state piezo horn rated at 85dB at 10 ft.

6.A visual green LED power-on indicator to confirm unit is receiving power. A visual red indicator to show unit is alarm.

7.A full function test button should check all alarm functions by simulating a smoke and CO condition, causing the unit to alarm.

8.Two Silence features - Low Battery Silence: Silence low battery chirp for up to 8

hours. Alarm Silence: Temporarily silence unwanted nuisance alarms.

9.Optipath 360 TechnologyTM - provides 360 degrees of direct access to the smoke sensing chambers.

10.Two Locking features - tamper resistant locking pins that lock battery drawer and/or alarm to mounting bracket.

11.The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 95%.

12.The unit shall contain mounting hardware and shall be listed for wall or ceiling mounting.

13.The unit shall at a minimum meet the requirements of UL217, UL2034, CSFM, NFPA 72, NFPA 720, NFPA 101, ICC

INSTALLATION OF ALARM

Installation of this alarm must conform to NFPA 72 and NFPA 720. Always check your local building codes. Follow all instructions for placement as outlined in the user’s manual.

THE PARTS OF THIS SMOKE/CO ALARM

TOP OF ALARM

1. Test/Silence button & remote control sensor

2. Slide-open battery drawer

3. Power/smoke alarm light

4. CO alarm light

BOTTOM OF ALARM

1. Mounting bracket

2. Mounting Slots

3. Battery Drawer - Install

2 AA batteries here

4. Turn this way to remove from bracket

5. Turn this way to attach to bracket

TECHNICAL SPECS

Alarm Dimensions:

5.0” dia x 2.0”H

Weight:

8.4 oz.

Operating Voltage:

2AA Alkaline Battery Powered

Temperature Range:

40F (4C) to 100F (38C)

 

 

Humidity Range:

10% to 95% relative humidity (RH)

 

 

Audio Alarm:

85dB at 10 feet

Test/Silence:

Electronically simulates smoke and CO conditions,

 

causing the unit to alarm and temporarily silence the alarm

Remote:

Use vol/chn buttons on most household IR remotes.

Manual:

Press and hold test/silence button

 

 

Alarm Reset:

Automatic when smoke and/or CO clears

 

 

Smoke Sensor:

Photoelectric

CO Sensor:

Electrochemical

Indicator Lights/Sounds:

 

DC Power:

Intermittent Red Light

Alarm:

Audio Alarm, rapidly flashing red light by corresponding

 

smoke or CO indicator light

 

 

Listing:

ETL to UL217 and 2034 Standards

SHIPPING SPECS:

Individual Carton Dimensions

5.13 ”L x 2.380”W x 5.13”H

Weight

0.66lbs.

Cube

0.036 ft3

UPC

0 29054 00347 8

 

 

Master Carton Dimensions

10.750”L x 7.880”W x 11.06”H

Master Pack

12

Weight

8.4lbs.

Cube

0.542 ft3

UPC

700 29054 00347 7

 

 

Pallet Information

 

Cases per Layer

22

Number of Layers

4

Cases per Pallet

88

Units per Pallet

1,056

Cube

53.9 ft3

Weight

804 lbs.

BATTERY DRAWER LOCK

Remove Pin from

 

 

 

 

 

Close Door. Insert Pin in Holes

Mounting Bracket

 

 

 

 

through alarm and Battery Drawer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

©2009 BRK Brands, Inc. a Jarden Corporation

 

Company (NYSE: JAH)

 

3901 Liberty Street Road

 

Aurora, IL 60504-8122

 

All rights reserved

brkelectronics.com

First Alert is a registered trademark of the First Alert Trust

BRK is a registered trademark of BRK Brands, Inc.

 

CM2912

Page 2
Image 2
First Alert SC05B Architectural And Engineering Spec, Installation Of Alarm, Technical Specs, Shipping Specs, CAT.SCO5B