CAT. SCO5B Series
TOP VIEW |
|
| SIDE VIEW | MOUNTING | |||
|
| BRACKET | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5.0"
2.0" 
ARCHITECTURAL AND ENGINEERING SPEC
The smoke/CO combination alarm shall be a First Alert Model SCO5 and shall provide at a minimum the following features and functions:
1.A Photoelectric smoke sensing chamber and an electrochemical CO sensor.
2.The unit shall have a lower and varying horn frequency to to make it easier for the elderly with normal age related hearing loss to better hear the horn
3.The unit shall have an "End of Life" signal. This signal should be capable of temporarily being silenced for up to 2 days. After about 2 days, the signal will resume. After about
4.Fully screened smoke sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms and be capable of self restoring.
5.Powered by supervised 2 AA alkaline batteries and a solid state piezo horn rated at 85dB at 10 ft.
6.A visual green LED
7.A full function test button should check all alarm functions by simulating a smoke and CO condition, causing the unit to alarm.
8.Two Silence features - Low Battery Silence: Silence low battery chirp for up to 8
hours. Alarm Silence: Temporarily silence unwanted nuisance alarms.
9.Optipath 360 TechnologyTM - provides 360 degrees of direct access to the smoke sensing chambers.
10.Two Locking features - tamper resistant locking pins that lock battery drawer and/or alarm to mounting bracket.
11.The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 95%.
12.The unit shall contain mounting hardware and shall be listed for wall or ceiling mounting.
13.The unit shall at a minimum meet the requirements of UL217, UL2034, CSFM, NFPA 72, NFPA 720, NFPA 101, ICC
INSTALLATION OF ALARM
Installation of this alarm must conform to NFPA 72 and NFPA 720. Always check your local building codes. Follow all instructions for placement as outlined in the user’s manual.
THE PARTS OF THIS SMOKE/CO ALARM
TOP OF ALARM
1. Test/Silence button & remote control sensor
2.
3. Power/smoke alarm light
4. CO alarm light
BOTTOM OF ALARM
1. Mounting bracket
2.Mounting Slots
3. Battery Drawer - Install
2 AA batteries here
4. Turn this way to remove from bracket
5. Turn this way to attach to bracket
TECHNICAL SPECS
Alarm Dimensions: | 5.0” dia x 2.0”H | ||
Weight: | 8.4 oz. |
| |
|
|
|
|
Operating Voltage: | 2AA Alkaline Battery Powered | ||
|
|
| |
Temperature Range: | 40°F (4°C) to 100°F (38°C) |
| |
|
|
| |
Humidity Range: | 10% to 95% relative humidity (RH) |
| |
|
|
|
|
Audio Alarm: | 85dB at 10 feet | ||
|
|
|
|
Test/Silence: | Electronically simulates smoke and CO conditions, | ||
|
| causing the unit to alarm and temporarily silence the alarm | |
| Remote: | Use vol/chn buttons on most household IR remotes. | |
| Manual: | Press and hold test/silence button | |
|
|
|
|
Alarm Reset: | Automatic when smoke and/or CO clears | ||
|
|
| |
Smoke Sensor: | Photoelectric | ||
CO Sensor: | Electrochemical | ||
|
|
| |
Indicator Lights/Sounds: |
|
| |
| DC Power: | Intermittent Red Light | |
| Alarm: | Audio Alarm, rapidly flashing red light by corresponding | |
|
| smoke or CO indicator light | |
|
|
|
|
Listing: | Listed to UL217 and 2034 Standards | ||
SHIPPING SPECS:
Individual Carton Dimensions |
|
|
|
| 5.13 ”L x 2.380”W x 5.13”H |
| ||||||||||
| Weight |
|
|
|
| 0.66lbs. |
| |||||||||
| Cube |
|
|
|
| 0.036 ft3 |
| |||||||||
| UPC |
|
|
|
| 0 29054 00347 8 (SCO5B) |
| |||||||||
|
|
|
|
|
|
|
|
|
|
| 0 29054 00304 1 (SCO5LB) |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Master Carton Dimensions |
|
|
|
| 10.750”L x 7.880”W x 11.06”H |
| ||||||||||
Master Pack | 12 |
|
|
| ||||||||||||
Weight |
|
|
|
| 8.4lbs. |
| ||||||||||
| Cube |
|
|
|
| 0.542 ft3 |
| |||||||||
| I2 of 5 |
|
|
|
| 700 29054 00347 7 (SCO5B) |
| |||||||||
|
|
|
|
|
|
|
|
|
|
| 100 29054 00304 8 (SCO5LB) |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pallet Information |
|
|
|
|
|
|
|
|
|
| ||||||
| Cases per Layer | 22 |
|
|
| |||||||||||
| Number of Layers | 4 |
|
|
|
|
| |||||||||
| Cases per Pallet | 88 |
|
|
| |||||||||||
| Units per Pallet | 1,056 |
|
|
| |||||||||||
| Cube |
|
|
|
| 53.9 ft3 |
| |||||||||
| Weight |
|
|
|
| 804 lbs. |
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BATTERY DRAWER LOCK |
| |||||||||||||||
| Remove Pin from |
|
|
|
| Close Door. Insert Pin in Holes |
| |||||||||
| Mounting Bracket |
|
|
|
| through alarm and Battery Drawer |
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
©2009 BRK Brands, Inc. a Jarden Corporation
Company (NYSE: JAH)
3901 Liberty Street Road
Aurora, IL
First Alert is a registered trademark of the First Alert Trust
brkelectronics.com BRK is a registered trademark of BRK Brands, Inc.
CM2954
