Page 5 of 12 | Isotemp Laboratory and Chromatography Refrigerators |
|
|
Operation
Control Layout
Part Number: 104416
The customer should have the wall receptacle and circuit checked by a qualified electrician to verify the receptacle is properly grounded and meets power requirements specified on the data plate.
WARNING: DO NOT under any circumstances cut or remove the third (ground) prong from the power cord. DO NOT use a
Where a two prong wall receptacle is encountered, it is the personal responsibility and obligation of the user to have it replaced with a properly grounded three prong receptacle.
CAUTION: Do not use an extension cord. Use of an ungrounded cord or an overloaded circuit VOIDS the compressor warranty.
WARNING: If the unit is tilted in excess of 30 degrees, level the unit then wait at least 12 hours before applying power to it.
WARNING: This product is not approved for storage of flammable or explosive materials. Also, it is not approved for use in hazardous locations containing explosive atmospheres.
Before operation, become familiar with the refrigerator controls located on the refrigerator header panel. A layout of the control is given below.
