Fisher & Paykel 6102 Series manual Cleaning

	CLEANING	10
Cleaning Your Cooktop	The element bowls should be cleaned regularly to
	avoid food residue being burned on the enamel.
	Wipe out using warm water and detergent or liquid
	cleaner containing ammonia. The element bowls
	have an acid resistant finish but spillovers of acidic
	foods should be wiped up as soon as possible to
	avoid damaging the enamel.
Cleaning your Range	The aluminium liners supplied for the element
	bowl will deteriorate with use and are available
	as a spare part.
Oven Door	All surfaces can be wiped with a damp cloth and
	liquid detergent or non-abrasive cleaner.
	Wipe the outside surfaces frequently, using warm
	water and a household detergent or a spray on,
	wipe off cleaner.
	To remove the oven door for easier cleaning:
	1. Open the door to the first stop position.
	2. Lift the door to disengage the hinges by
	holding the handle only. Do not lift the door
	in the vicinity of the hinges, as they are spring
	loaded and will snap back.
	3. To replace, place hinge arms in the slots, lift
	the door by the handle and push from the
	bottom of the door to engage the hinges.
Warmer Drawer	The warmer drawer can be removed for cleaning.
	Pull out until it stops, then lift it clear of the Range.
	We recommend that the warmer drawer is removed
	or paper towels are placed under the door when
	cleaning the oven to avoid accidental spills of
	oven cleaner onto the warmer drawer.
Oven and Oven Racks	Clean the inside of the oven while still warm,
	using household detergents or an ammonia based
	cleaner, e.g. Handy Andy. “Off the shelf” oven
	cleaners may be used providing the instructions
	supplied by the manufacturer are followed
	carefully. Failure to follow the manufacturer’s
	instructions could stain or damage the enamel.
Oven Lamp	Turn oven off at wall before touching the oven
	lamp. The glass cover can be removed for
	cleaning. Always replace the glass cover before
	using the oven. Ensure the appliance is switched
	off before replacing the oven lamp to avoid the
	possibility of electric shock.