22 Fault codes
Please read the following pages before you call for service.
You can correct many of your dishwasher’s problems yourself, using the checklists on the
following pages.
Problem Fault
code
Possible causes What to do
First 2
programme
indicators
flashing
E1 The door is not properly closed. Close the door firmly.
1 and 3
programme
indicator lights
flashing
E2 Temperature sensor faulty Turn the water and power off to
the dishwasher. Call your Fisher
& Paykel dealer or Authorised
Service Centre.
1 and 4
programme
indicator lights
flashing
E3 Drain hose is too low.
The wash water level is too low.
Ensure that drain hose is
connected in accordance with the
‘Installation instructions’.
Programme
indicators 1, 3
and 4 flashing
E4 Drain hose is crimped or bent.
The wash water is not draining out.
Drain hose is too high.
Check hose and straighten if
needed.
Ensure that drain hose is
connected in accordance with the
‘Installation instructions’.
First 3
programme
indicators
flashing
E5 Water tap not turned on.
Insufficient water supply pressure.
Water supply hose is crimped or
bent.
Drain hose is too low.
Ensure the water is connected
and turned on.
Check household water pressure.
Check hose and straighten if
needed.
Ensure that drain hose is
connected in accordance with the
‘Installation instructions’.
First 4
programme
indicators
flashing
E6 Flood switch activated. Turn the water off and the mains
power off to the dishwasher. Call
your Fisher & Paykel dealer or
authorised service centre.