INTEGRATED MODELS WITH BADGE (GB IE) ONLY - INSTALLING THE FRONT PANELS & BADGE CONTROLS 18
15b DETERMINE BADGE CUTOUT LOCATIONS | 16b REMOVE BRACKETS & DISCONNECT BADGES |
WARNING!
Electrical Shock Hazard
Before continuing, ensure that the product is disconnected from the power supply.
Failure to follow this warning may result in electrical shock, injury or fire.
127 mm
228.5 | mm |
|
| 228.5 | mm |
|
|
d | zo e |
|
| 211 mm |
|
| |
| 54 mm |
|
| |
| 127 mm | Badge |
| |
30 mm | 25 mm | zone | ||
| ||||
|
| |||
|
|
|
3
1
2
1
Repeat for the other drawer
4
17b ROUTE BADGE WIRING THROUGH PANEL
1
2
Repeat for the other drawer
18b ATTACH PANELS TO PANEL BRACKETS
There must be at least |
|
3 screws used each side | 2 |
1 | 16 mm x6 |
Important!
Break off and discard the tab at the top of the Lower Panel Bracket. 
Align bottom |
| |
of panels |
| |
with bottom | 3 | |
of brackets | ||
|
