Fisher & Paykel DD24DC(T)B7 During and after the wash, Dos and don’ts of loading, For more info

During and after the wash

As the wash progresses, the display will count down the minutes remaining and show what stage the program is at (different

programs will go through different stages). When the program has finished, the display will show and the dishwasher will beep six times.

			These lines may remain on after
			the program has finished to
			indicate that the drying fan is
			still running.
			min
Dirty dishes Pre-rinsing Washing	Rinsing	Drying	Clean dishes -
			program has finished

You may notice the following noises at the end of the wash. These are all part of normal operation: In double models, both drawers may be draining simultaneously.

The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan assists with drying and uses negligible amounts of energy.

For best drying results, we recommend unloading the dishes once they have cooled.

Dos and don’ts of loading

Sharp or pointed items must be placed	Protruding items will stop the
horizontally or with sharp edges/points	internal lid of the dishwasher from
facing down to avoid risk of injury.	sealing properly, which could result
	in a service call.

A neatly arranged load with evenly	Overcrowding reduces wash
spaced dishes helps wash performance.	performance.

Preference options

You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher.

Option	Rinse aid	Water	Open drawer auto	Beeps at end of	Closed drawer autolock		Clean dish indication
		softener*	power-on	wash
	Regulates the amount of	Refer to	Your dishwasher	Your dishwasher	When this setting is on,		When this setting is on,
	rinse aid dispensed. Reduce	the ‘Water	is factory-set to	is factory-set to	the drawer will		will remain in the
	this setting if there is excess	softener’	automatically	beep six times	automatically lock 30		display after a wash to
	foam after a wash. Increase	section of	power on for 30	at the end of a	seconds after it’s closed.		remind you that the dishes
What	this setting if dishes are wet	the ‘User	seconds whenever	wash.	It can then be unlocked by		are clean. This is useful if
	or streaky after a wash.	guide’ for	you open the	You can turn this	pressing	(unless Keylock	you prefer storing clean
does
		details.	drawer.	setting off.	or Childlock is also activated).		dishes in your dishwasher,
it do?
			You can turn this		Useful in boats or motor		taking out only what you
			setting off.		homes.		need. When the last clean
							dish has been removed,
							press	to return to
							normal operating mode.

How to change the setting of an option

1CHECK & OPEN

Check that there is no wash underway, press , then open the drawer.

2ENTER MENU & SCROLL TO OPTION

To enter the menu: press the selector on top first with one finger, then the button on the front with another finger, hold both until one long beep sounds, then release.

You are now in the Rinse aid option of the preference options menu.

If you want to change the Rinse aid setting, go to step 3 now.

If you want to change the setting of another option, you will need to scroll to that option first.

To scroll to the next option: press . To know which option you’re in, watch the letters in the display (see table below). When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).

Option	Rinse aid	Water	Open drawer	Beeps at end	Closed drawer	Clean dish
		softener*	auto power-on	of wash	autolock	indication

Which option

am I in?

Possible	1 to 5	0 to 5	On or Off	On or Off	On or Off	On or Off
settings
Example			On	On	On	On
	4 indicators lit = setting is 4		Off	Off	Off	Off

3CHANGE SETTING

Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, you need to press 3 times.

4SAVE SETTING & QUIT MENU

Press . This will save the new setting and quit the preference options menu.

*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.

Ensure there is enough space between	If plates and cutlery are nesting,
plates. Mix spoons, knives and forks	they are less likely to be cleaned
within the cutlery basket to prevent	well.
them from nesting.

Ensure that water reaches all items on	Dishware is blocking water from
the adjustable racks.	reaching items on the adjustable
	racks.

For more info

For detailed information on the features of your dishwasher

For warranty information

If you…

have any questions or comments

need a Fisher & Paykel authorized technician to service your product

need replacement parts or accessories want to register your product

see your ‘User guide’

see your ‘Service and warranty’ booklet

see your ‘Service and warranty’ booklet or contact us

NZ	toll-free, 24/7	0800 372 273	www.fisherpaykel.co.nz
AU	toll-free, 24/7	1300 650 590	www.fisherpaykel.com.au
USA	toll-free, 24/7	1 888 936 7872	www.fisherpaykel.com
CA	toll-free, 24/7	1 888 936 7872	www.fisherpaykel.ca

590191B 09.12