Installation to Natural gas

Plug

Figure 11a Gas supply inlets

Figure 11b Connecting the gas

Installation instructions 11

Installation to Natural Gas must conform to the Code of Practice, etc. The supply pressure for Natural Gas is 20 mbar.

Installation to Liquid Petroleum gas

This appliance must only be connected to LPG after an LPG conversion kit has been fitted. The installation must conform to the relevant British Standards.

Important!

Only a suitably qualified and registered person may convert the appliance to a different gas type. When using Butane gas a supply pressure of 28 -30 mbar is required.

When using Propane gas a supply pressure of 37 mbar is required.

Notes:

Flexible hoses can be used where the sited ambient temperature of the hose does not exceed 70°C. These hoses must be manufactured in accordance with BS669 part 1 and be of the correct construction for the type of gas being used.

Gas hoses designed for natural gas MUST NOT be used for supplying LPG gas (LPG gas hoses can be identified by a either a red band or stripe on the rubber outer coating of the hose).

The hose should not be crushed or trapped or be in contact with sharp or abrasive edges. It should also not be subjected to corrosion by acidic cleansing agents.

To connect the gas supply:

1Fit the 1/2” BSP (female) connector (supplied with the cooker in a separate kit) to the gas inlet at the rear of the cooker interposing the gasket. Check the correct positioning of the connector as shown and always use two suitable spanners (Fig 11b).

2Connect the gas supply to the right or left gas inlet at the rear

of the cooker. The pipe is not to cross the cooker.

3 Close the unused end inlet pipe with a plug, interposing the gasket (Fig. 11a - Fig. 11b).

4 To avoid damage to the appliance gas rail inlet pipe tighten the fittings using two suitable spanners (Fig. 11b).

5 Using a suitable leak detection fluid solution (e.g. Rocol) check each gas connection one at a time by brushing the solution over the connection. The presence of bubbles will indicate a leak. If there is a leak, tighten the fitting and then recheck for leaks.

IMPORTANT!

Do not use a naked flame to test for leaks.

Cooker manifold

Manifold male pipe fitting

1/2” G cylindrical (ISO 228-1) male

Gasket (*)

1/2” G cylindrical (ISO 228-1) female

Connector (*)

1/2” BSP (female)

(*) Supplied with the appliance in a separate kit.

			10 mm
20 mm			10 mm




20 mm					10 mm

GB IE specifications

Fisher & Paykel is a renowned name in the field of home appliances, particularly known for their innovative and stylish kitchen and laundry solutions. The Fisher & Paykel GB IE series stands out as a prime example of the brand's dedication to quality and design.

One of the main features of the GB IE series is its sleek and modern design, which seamlessly integrates into contemporary kitchen aesthetics. The appliances are not only functional but also add a touch of elegance to any home environment. The use of premium materials such as stainless steel ensures durability while maintaining a polished look.

In terms of technology, the GB IE series incorporates cutting-edge innovations designed to enhance user experience. Smart technology features enable users to control appliances remotely, making it easier to manage daily tasks. For instance, smart connectivity allows homeowners to monitor and adjust settings from a smartphone, providing convenience and peace of mind.

Efficiency is another hallmark of the Fisher & Paykel GB IE series. The appliances are designed to minimize energy consumption while maximizing performance. This not only benefits the environment but also leads to savings on energy bills, making them a sustainable choice for modern homes.

The GB IE series also boasts unique characteristics that set it apart from competitors. The intuitive user interfaces ensure that operation is straightforward, with clear controls and displays that enhance usability. Additionally, the series includes innovative features like dual-fuel cooking and various cooking modes, catering to the diverse needs of home cooks.

Another impressive element is the emphasis on functionality without compromising on style. The GB IE appliances often feature customizable options, allowing customers to choose finishes and configurations that best suit their preferences and kitchen layouts. This flexibility helps make each appliance a perfect fit for any space.

Overall, Fisher & Paykel's GB IE series exemplifies a commitment to innovation, efficiency, and design. With its blend of advanced technology, thoughtful features, and aesthetic appeal, this series provides a sophisticated solution for homeowners looking to elevate their kitchen and laundry experiences. The combination of style, performance, and practicality makes the GB IE series a standout choice for those seeking quality appliances.

Fisher & Paykel GB IE Installation to Natural gas, Installation to Liquid Petroleum gas

Models: GB IE

Installation instructions 11