10

Troubleshooting

Troubleshooting tips

Problem

Possible causes

What to do

Waste disposer

No electricity at the power

Check that the plug is correctly connected and power is

is not starting

outlet.

turned on.

 

 

 

 

 

Check another appliance at the same outlet.

 

 

 

 

 

Check house fuse.

 

 

 

 

Air switch tubing not

Check that the air switch, or wall switch, is correctly

 

connected

connected. Refer to page 7 of the installation instructions.

 

 

 

 

Foreign object may be

Turn power supply and water tap off. Rotate the turntable,

 

lodged between the

using a plastic, wooden or non-magnetic implement to

 

turntable and grinding ring.

dislodge the foreign object.

 

 

 

 

Grinding chamber may

Turn the power and water tap off and, using a plastic,

 

be overloaded with food

wooden or non-magnetic implement, remove the

 

waste or foreign matter.

food waste or foreign matter. Refer to the operating

 

 

instructions section.

 

 

 

 

Safety overload button may

The reset overload button is a red button located

 

have tripped.

externally, opposite the power cord outlet, near the

 

 

bottom of the waste disposer.

 

 

 

Abnormal noise

A spoon, bottle cap or

Turn power supply and water tap off. Wait until grinding

when operating

other foreign object may

blades and turntable has stopped turning. Use a plastic,

 

have fallen into the waste

wooden or non-magnetic implement to remove the

 

disposer

foreign object.

 

 

 

Waste disposer

Foreign object may be

Turn power supply and water tap off. Rotate the turntable,

is jammed

lodged between the

using a plastic, wooden or non-magnetic implement to

 

turntable and grinding ring.

dislodge the foreign object.

 

 

 

Unit is leaking

Improper seating of the

Check that the sink flange is centred and sealed tightly

at the top

sink flange.

into the sink drain by the mounting assembly from

connections

 

underneath. Refer to step 2 of the installation instructions.

 

 

 

 

Improperly installed rubber

Check that the rubber gasket is sitting flat under the

 

gasket.

lip of the sink flange. Refer to step 2 of the installation

 

 

instructions.

 

 

 

 

Mount ring not tightened

Discharge outlet elbow may not be tightened.

 

properly

Check the discharge elbow is tight. Refer to step 13 of the

 

 

installation instructions.

 

 

 

Unit is leaking

Discharge outlet elbow

Check the discharge elbow is tight. Refer to step 13 of the

at the discharge

may not be tightened.

installation instructions.

outlet.

 

 

Water is slow to

Rubber splash guard

drain from the

fingers trapping air inside

sink

the chamber.

When the rubber splash guard is new, air can become trapped within the chamber preventing water from draining quickly. Pushing food through the rubber splash guard will release the air and the water will drain. Over time, the splash guard fingers will soften and flex, holding back less air and aiding drainage.

Page 11 Page 13
Page 12
Image 12
Fisher & Paykel GD75IA1 manual Troubleshooting tips, Problem Possible causes What to do
Page 11 Page 13

GD75IA1 specifications

Fisher & Paykel is renowned for its commitment to providing innovative, efficient, and stylish home appliances, and the GD75IA1 is no exception. This 75cm integrated rangehood stands out for its sleek design and exceptional performance, blending seamlessly into modern kitchens while delivering powerful ventilation and user-friendly features.

One of the main features of the GD75IA1 is its impressive extraction rate, which is essential for clearing cooking odors, smoke, and steam from the kitchen. With a maximum extraction capacity of 750m³/h, it can efficiently handle the demands of both everyday cooking and elaborate gourmet meals. This makes it an excellent choice for both casual cooks and culinary enthusiasts.

Equipped with a powerful motor, the rangehood offers multiple fan speeds, allowing users to adjust ventilation according to their cooking needs. Whether simmering a delicate sauce or searing meat at high temperatures, the GD75IA1 ensures a fresh and pleasant kitchen environment.

The design of the GD75IA1 reflects Fisher & Paykel's philosophy of combining form and function. Its integrated design means it can be installed within cabinetry, maintaining the aesthetic continuity of the kitchen. The stainless steel finish not only looks modern and sophisticated but is also easy to clean, ensuring that the appliance not only performs well but also remains visually appealing.

A notable technology featured in the GD75IA1 is the use of LED lighting. These energy-efficient lights illuminate the cooking surface below, providing excellent visibility while consuming less electricity compared to traditional bulb options. This ensures that users can monitor their cooking without the distraction of shadowy areas.

Another characteristic that sets the GD75IA1 apart is its easy-to-use control interface. The intuitive layout allows for quick adjustments, even when busy in the kitchen. The stainless steel baffle filters are designed for easy removal and cleaning, further simplifying maintenance. These filters are not only efficient in capturing grease and smoke but are also dishwasher safe, allowing for hassle-free hygiene upkeep.

In summary, the Fisher & Paykel GD75IA1 integrated rangehood combines powerful performance, modern design, and user-friendly features to enhance the cooking experience. Its efficient extraction rates, stylish aesthetics, and commitment to ease of use make it a standout choice for any contemporary kitchen.
Top Page Image Contents