6
Cleaning and maintenance
Caution!
Never use abrasive or oil based liquid cleaners.
General maintenance
The manufacturer is not liable for any damage caused by not following these instructions.
The wall canopy should be cleaned regularly using warm water with soap or mild liquid detergents. This ensures that no
Note: in areas of high humidity and coastal environments cleaning should be carried out frequently.
Aluminium filters
The grease filters must be periodically cleaned (at least every two months).
Remove the grease filters and wash them either by hand using hot soapy water or place them in the dishwasher using mild detergent. Badly smoked filters may be cleaned with “cookware cleaners”.
Note: some discolouration of the frame may occur.
Charcoal filters
Charcoal filters are designed to remove grease and odours from cooking vapours, prior to the cleansed air
Note:
Fully saturated charcoal filters can become a barrier to air movement, impeding the wall canopy’s performance.
In the event of fire, fully grease laden filters could be flammable and therefore regular replacement is recommended.
In ducted installations, conventional aluminium filters are recommended.
For replacement charcoal filters, ducting accessories, spare parts and service, please contact your local supplier or Fisher & Paykel Customer Care Centre.
| Light bulb replacement |
|
| (Halogen bulb 12 Volts/20 Watt) |
|
1 | Switch off the power to the canopy hood. |
|
2 | Use a small bladed screwdriver to prise off the light cover, |
|
| taking care not to damage the surrounding material. |
|
3 | Remove the defective bulb from the canopy hood. |
|
4 | Replace with a new bulb using a cloth. Do not touch the |
|
| bulb with fingers as this will shorten the life of the bulb. |
|
5 | Snap the cover back into place. | Fig.6 Replacing a light bulb |
