15
b
OPERATIONS TO BE EXECUTED FOR THE REPLACEMENT OF THE INJECTORS OF THE OVEN AND BROIL BURNERS
a) Oven Burner
– Lift and remove the lower panel inside the oven.
– Remove the burner securing screw (fig. 2.10).
– Withdraw the burner as shown in figure 2.11 and rest it inside the oven. Take care not
to damage the wire to the ignition electrode and the safety valve probe.
– Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in fig. 2.11)
and replace it by the proper one according to the kind of gas.
Then replace the burner repeating the above steps in reverse order.
b) Broil Burner
– Remove the burner by unscrewing the front screw (fig. 2.12).
Gently suspend the burner as shown in figure 2.13. Be careful not to damage the
wire of the electric ignition and the probe of the safety valve.
– Using a 7 mm box spanner, replace the injector (indicated by the arrow in fig. 2.13)
by the proper one according to the kind of gas.
– Replace the burner repeating the above steps in reverse order.
Fig. 2.10
Fig. 2.11
Fig. 2.12
Fig. 2.13
2