Fisher & Paykel RF540 Kit part numbers and cut out dimensions table, Part of base, Optional

8TRIM INSTALLATION

9MOVE INTO CAVITY

The bottom trim is designed to cover the front edge of the floor base panel of the cabinet. This trim can be installed on a raised toe kick (diagram 1a) or toe kick below the refrigerator (diagram 1b)

Remembering that if this trim is to be used with the refrigerator at floor level the cut out dimensions will need to have 16mm (5/8") added to its height to allow for the bottom trim to be fitted. Note this trim is optional on this type of installation. If used with a raised toe kick the 16mm packer should be part of the base (diagram 5). Therefore 16mm is not required to be added to the height dimension.

1.If used place the 16mm (5/8") piece of plywood or with bottom trim fitted into the cavity (diagram 5 or 6). Note the piece should be the same size as the base of the cavity.

2.Remove protective coating film from surround trim.

3.To install the surrounds, first clip in the top surround. Ensure the locator strips at the rear of the top brackets clip into the rear of the top trim.

4.Clip both side trims into place starting from the front cabinet edge.

16mm (5/8 inch) plywood or MDF board insert

Part of base

Diagram 5

If installing two refrigerators/ freezers side by side a joiner kit is required. Refer to these instructions and fit joiner kit before pushing refrigerator into place, see diagram 6.

Plug refrigerator into electrical socket, run water connection to refrigerator if required (Ice & Water models only).

Gently install refrigerator into cabinetry making sure it is centred within the surround trim.

The front of the refrigerator door should be flush with the front of the cabinetry to obtain an integrated look.

Ensure the front leveling feet are adjusted to take the load of the fridge and keep it in place.

Optional

Diagram 6

10Kit part numbers and cut out dimensions table

Kit Part Numbers Cut Out Dimensions

	Refrigerator Model		Brushed	Iridium	Plus	Width	Depth	Height
					Joiner
			Stainless	Stainless		A	B*	C**
					Kit
1 x 635	807		821351	821361		807mm	700mm	1790mm
(25") LH						31 13⁄16”	27 9/16”	70 1/2”
	635	1790
1 x 635	807		821352	821362		807mm	700mm	1790mm
(25") RH						31 13⁄16”	27 9/16”	70 1/2”
	635	1790
2 x 635	1467		821353	821363	819264	1467mm	700mm	1790mm
(25")						57 3/4”	27 9/16”	70 1/2”
	635	635	1790
1 x 680	852		821354	821364		852mm	700mm	1790mm
(26 3/4")						33 9⁄16”	27 9/16”	70 1/2”
LH
	680	1790
1 x 680	852		821355	821365		852mm	700mm	1790mm
(26 3/4")						33 9⁄16”	27 9/16”	70 1/2”
RH
	680	1790
2 x 680	1557		821356	821366	819264	1557mm	700mm	1790mm
(26 3/4")						61 5/16”	27 9/16”	70 1/2”
	680	680	1790

				Kit Part Numbers			Cut Out Dimensions
		Refrigerator Model		Brushed	Iridium	Plus	Width	Depth	Height
						Joiner
				Stainless	Stainless		A	B*	C**
						Kit
1 x 790	962			821357	821367		962mm	700mm	1790mm
(31 1/8")							37 7/8”	27 9/16”	70 1/2”
LH		790	1790

1 x 790	962		821358 821368		962mm	700mm	1790mm
(31 1/8")					37 7/8”	27 9/16”	70 1/2”
RH		790		1790

2 x 790		1777			821359 821369 819264 1777mm	700mm	1790mm
(31 1/8")					70”	27 9/16”	70 1/2”
	790		790	1790

1 x 900	1072	821360	821370	1072mm	700mm	1875mm
(35 7/16")				42 ¼”	27 9/16”	73 13/16”
	900	1875
1 x 790	962	837315	837316	962mm	700mm	1790mm

(31 1/8")			37 7/8”	27 9/16”	70 1/2”
	790	1790

*Depth is a minimum requirement

**Height is without 16mm MDF packer

***For refrigerators / freezers where the hinge is not concealed by the door refer to spare parts for the correct kit number.

820413 D should list non concealed number kit. Concealed Hinge Non Concealed Hinge

Before you call for service or assistance ...

Check the things you can do yourself. Refer to the installation instructions, your User Guide – in particular the troubleshooting section and check that:

1your product is correctly installed.

2you are familiar with its normal operation.

If after checking these points you still need assistance or parts, use the link at

www.fisherpaykel.com for regional service providers.

821996 B  NZ AU GB AE HK SG IE US CA EU CN IN  08.12