INSTALLATION INSTRUCTIONS

PLEASE NOTE: Your model of DishDrawer® may differ from the model shown in the installation diagrams. Installation is similar for all models for either Single or Double models. Information referring to Single models only is highlighted in blue. Installation diagrams have been simplified to enable clearer instruction. FOR INTEGRATED PRODUCTS FOLLOW THE INTEGRATED PANEL PREPARATION INSTRUCTIONS P/N 526608, BEFORE MOVING THE PRODUCT INTO THE CAVITY.

R

READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY.

STEP 1: MOVING THE PRODUCT INTO THE CAVITY

2

1

3

4

MOUNTING TAB OPTIONS

The mounting tabs are in pairs, one on each side of the product. They are used to secure the product to the cavity sides. Installation requires two sets of tab pairs be used. DOUBLE MODELS ONLY - A and B tab pairs OR B and C tab pairs may be used. All tabs would be optimum.

1If the top installation tabs C are to be used, fit to the chassis by inserting into the top slots as shown. Ensure the tabs are fully locked in place.

2Optional Flexible Extrusion

If the cavity is 24” x 341/2” (610mm x 876mm) flexible extrusions can be attached along the top and sides of the product. Open the drawer(s) to expose the chassis trim. Remove extrusion backing and adhere to the side and top of DishDrawer®. Refer to the drawing for correct placement.

Be sure that extrusions do not prevent the drawer from closing completely.

3Check cavity for any obstructions that may interfere with sliding the product back. DOUBLE MODELS ONLY - loosen the feet first.

4Push product into cavity to suit adjacent cabinetry. Do not push middle of drawer(s). Be sure inlet, drain hose(s) and power supply cord are not restricted or damaged by carefully pulling all excess length through the services hole, while the product is being pushed back into the cavity.

WARNING!

Important!

DO NOT push

Be careful of

middle of drawer(s).

sharp edges.

 

FOR SINGLE MODELS, check that the base of the product is not bowed. Do not rest single models on your knee when moving them into the cavity.

STEP 2: REMOVING THE TUB

5 7

6

9

8

Important! (SINGLE MODELS ONLY).

The product may move. Mark chassis position on cavity.

5SINGLE MODELS ONLY. Gently open the drawer and mark the chassis position on the cavity, before removing the tub.

6Open the drawer (bottom drawer in DOUBLE MODELS). Release the tub by depressing the right hand tub clip and pushing it back 13/16” (30mm). Repeat on the left hand side.

7Lift the tub up off the drawer runners.

8Slide both runners back into the product.

9Place the tub onto the floor.

For SINGLE MODELS, depending on the height of the cavity, the tub will need to be supported, eg on a chair.

7

Page 6 Page 8
Page 7
Image 7
Fisher & Paykel V3 DD6031, V3 DS6031 Installation Instructions, Removing the TUB, Mounting TAB Options
Page 6 Page 8

V3 DD603, V3 DS603, V3 DS6031, V3 DD6031 specifications

Fisher & Paykel has established itself as a leader in kitchen appliance design, and their V3 series offers innovative dishwashing solutions tailored to modern kitchens. Among the standout models in this series are the V3 DD6031, V3 DS6031, V3 DS603, and V3 DD603. Each model features a unique set of characteristics aimed at enhancing user experience, energy efficiency, and performance.

The V3 DD6031 model is designed for dual function, allowing it to operate two zones simultaneously. This feature not only optimizes the washing process but also enhances flexibility for varying loads. With SmartDrive technology, this dishwasher minimizes water and energy consumption while maximizing cleaning power. The intuitive design also boasts quiet operation, which makes it an excellent choice for open-plan living.

Moving on to the V3 DS6031, this integrated model seamlessly blends into kitchen cabinetry, ensuring a sleek aesthetic while maintaining powerful cleaning capabilities. The DS6031 showcases the ability to fit in narrow spaces without compromising on performance. This model also offers gentle on fabrics and safe for delicate dishes, making it ideal for households with diverse dishware and glassware. It utilizes advanced spray technology which ensures even coverage and superior cleanliness.

The V3 DS603 model continues this trend of stylish integration and impressive performance. It features a fold-down rack system, providing greater flexibility for loading various types and sizes of dishes. With its adjustable tines, users can customize the interior layout, accommodating everything from large pots to delicate stemware. The user-friendly interface also offers multiple wash cycles and options, allowing for a tailored washing experience.

Finally, the V3 DD603 retains the classic Fisher & Paykel design elements while incorporating modern technologies. This model offers a steam clean option which effectively sanitizes dishes while being gentle on materials. Additionally, the V3 DD603 is equipped with an eco-mode, which reduces water and energy usage, appealing to environmentally conscious consumers.

Together, these models highlight Fisher & Paykel's commitment to blending efficiency, performance, and aesthetic design. The V3 series truly represents the evolution of dishwashing technology, prioritizing user experience and eco-friendly operation without sacrificing performance. The thoughtful engineering behind each model makes them suitable for various kitchen designs and lifestyles, ensuring that cleaning up after meals is as seamless as possible.
Top Page Image Contents