Fisher ICR-B50 BEFORE OPERATION, Earphone, Hold function, External microphone, Auto power off function, Turning the power on and off

BEFORE OPERATION

Earphone

Connect an earphone (8 ohms, cord length less than 2 meters (6 feet, 6 inches), not supplied) to the EAR jack. (The speaker is automatically dis- connected.)

Note: Be sure to reduce the volume before connecting or disconnecting the earphone.

External microphone

Connect an external microphone (not supplied) to the MIC jack. (The builtin microphone is automatically disconnected.)

Turning the power on and off

Press the n button to turn on the power. The display appears as shown right. The unit is now in standby mode.

To turn off the power, press the n button for at least 1 second in the stop mode.

Fig. 4

Auto power off function

The power turns off automatically when 5 minutes have elapsed after entering the stop, playback pause or recording pause mode.

Hold function

The HOLD switch (back of the unit) disables the buttons (m, n, a, c or d) from operating, to prevent playback or recording due to accidental operation.

Set the HOLD switch to ON. “HOLD ON” appears briefly on the display. For normal use, set the switch to OFF. “HOLD OFF” appears briefly on the display.

5